Windows 10: Random Task View, disappearing cursor, window changes after Surface Pro Factory Reset

I recently ran a factory reset to clear up space and try to speed up my slowing system, but after the reset, I am experiencing various errors in the behaviour of the system. Quite often, the cursor will disappear for a second, the focused window will change, and Task View will be activated. It's infuriating as this happens at least once every 30 seconds. I am using the Surface with a Cintiq 32 Pro as the main display, but I had the same setup before the factory reset with no problems at all. Please advise on this situation. Thanks in advance.

:)

 

SURFACE PRO 3 RESET TO FACTORY DEFAULTS PROBLEM

The camera caused a system freeze every time it was activated so I thought why not restore.

• I attempted to reset my Surface Pro 3 to Factory defaults.
• The Surface Pro made it to 1% then crashed.
• Now it is in a reboot loop.

I have tried several times and now it gives an "Unable to reset your PC. A required drive partition is missing" error.

Do you have any suggestions on how to make it work again?

 

Microsoft surface pro 4 Mouse cursor disappear

Microsoft surface pro 4 Mouse cursor disappear

when it happen need to log off and login then cursor is visible

windows update did successfully even Microsoft surface Arc mouse driver reinstalled

Bluetooth driver update

but still issue reoccur

how i will eliminate this issue not happening again

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?