Windows 10: Receipt Printer Question

Dear Microsoft ,I would like to report you a serious bug in your upgrades which are having a real pain in the ... after 1909 which so far it's the best...So i was saying , you have a bug in the 2004 until now 21H1 Scenario : Server 2012/2016/2019 Print server - local setup printer with static ip to client ip address just refuses to print and always going with error on any server "ACCESS DENIED" and no it's not the problem from the servers. Problem starts after the 1909 which again it were perfect and still is. Second picture it's from the client machine which it's fully updated

:)

 

WINDOWS 10 CONNECTIMG RECEIPT PRINTER

THE USB on my receipt printer is not connecting to the computer, it keeps stating that the drive is unavailable. I don't know if its the software or the cable. My regular HP printer connected fine but not the receipt print. Any suggestion?

 

How to send command to serial/parallell port for Prolific (2305) USB to LPT port attached to receipt printer

I have a USB receipt printer that I know work and have tested to be working!

1. I know that the port is USB003 by doing the following:
   

Accidentally install generic EPSON driver and did a test print that caused garbage printed to the (wrongly installed driver) connected to port USB003.

1. I know that the printer connected to Windows 10 is working. And shown in Device Manager as "USB Printing Support" in "Universal Serial Bus controllers" section with the following Haredware Id USB\VID_067B&PID_2305&REV_0202. By doing the following:
   

Run Linux Mint (a flavor of Ubuntu) in Virtual Box in the same machine. Allow the virtual machine to use the "USB Printing Support" device which is then detected as /dev/usb/lp0. To test I do bellow command.

"sudo echo "test" > /dev/usb/lp0"

Which print test on the receipt printer!

Question:

1. However when properly confgured in my POS (Unicenta OPos) software. The printer does not print receipt!
   
2. When I did "echo "testing" > USB003" , it does not print. Perhaps there is other test command for windows? Need to run it as administrator or maybe wrong port name?
   

How to troubleshoot this on windows? Is there something wrong with my echo command?

Take note that I already remove printer configured to use USB003 since the POS and the CMD command is directly using port USB003 rather than true printer driver.

TIA
Haris

 

Epson receipt printer

Hi ChrisKelly466,

I am an independent advisor and a Microsoft user like you, and I would be happy to help you out with this.

Can you provide us with the model number of your Epson receipt printer?

It may help to install the latest drivers from their website, and we can help find it for you with the model number.

Please let us know and we would be happy to look into providing some different suggestions!

Regards,

-Ashton