Windows 10: Remote Desktop printer mapping with Windows 10 Home

I set up Remote Desktop on a brand new Windows 10 Home computer to attach to a Remote Desktop server at work. The session attaches to the server with no problem, but no local printers are showing up at all. And yes, the "Printers" check box is checked for using local printers in the remote session. Does Windows 10 Home support local printer mapping, or do I need to upgrade to Windows 10 Pro? Any suggestions on how to fix? Thanks for any input!

:)

 

Windows 10 - Remote Desktop

Hi,

We will surely assist you with the issue you are facing with Windows 10.
- Which version of Windows 10 Operating System are you using?

- Were you able to upgrade to Windows 10 successfully?

I suggest you to refer the below steps and see if this helps.

• 
  Enable remote desktop in settings
  
  • Control Panel\System and Security\System, Click "Remote Settings" on the left side
• 
  Verify my port forwarding settings were properly forwarding to my computers local IP address
  
  • run "cmd.exe" and then type "ipconfig". Find your IP from that list

[*]

• Make sure your firewall settings are open
• Go to "Control Panel\System and Security\Windows Firewall\Allowed apps"

• On the left, click "Allow an app or feature through Windows Firewall"
• Click "Change Settings"
• Find "Remote Desktop" in the list and make sure both "Private" and "Public" is checked.

Let us know if this helps.

Thank you.

Credits to : Jace_Sango.

 

Windows 10 Home Won't Print to Remote Printer


I have three computers.
Machine 1: Windows 10 pro, has the USB Brother HL-5040 printer
Machine 2: Windows 10 pro, prints OK to the remote printer.
Machine 3: Windows 10 home, Used to print, but not anymore (THIS IS THE PROBLEM).
I’ve tried everything that I can think of, and would appreciate any suggestions.
I did these steps on Machine 3 that did not work.

1. Remove the printer device.
2. Add a Printer
3. The printer that I want isn’t listed
4. Select a shared printer by name
5. Browse
6. Select the displayed Machine 1.
7. Select the displayed Printer.
8. Next
9. Failure “Connect to Printer”.
10. Add a printer using a TCP/IP address or Hostname
11. Next
12. Set Hostname to Machine 2, and set port name.
13. Detecting TCP/IP Port
14. Additional Port information required.
15. Device Type – Standard, Brother Port Server
16. Next
17. Detecting the Driver Model
18. Install The Print Driver
19. Select Brother and Brother HL-5040
20. Next
21. Replace the Current Driver
22. Printer Name (setting it to HL-5040)
23. Next
24. Do not share this printer
25. Next
26. You’ve successfully added “HL-5040”
27. Finish

Printing on Machine 3 puts the document in the print queue, which reports error printing.
Printing from Machine 2 to the printer on Machine 1 works perfectly.
All three machines are in the same HomeGroup. Machine 3 can access the shared files from Machine 1.

 

Remote Desktop

Okay guys need some help here before going crazy...
I am trying to setup a remote desktop connection and see exactly what the logged on user is looking at with out going through Windows Remote Desktop.

Since its local network I don't have any password or want to setup a password.

Any suggestions are appreciated