Windows 10: Requesting help/analysis of sleep-related BSODs ...

Hi, everyone:

OK - I am sincerely hoping someone can help me with this.

First, please go to the below link/thread to read what I wrote about the problem (it has WinDbg info, etc.):

https://www.tenforums.com/general-dis...dows-10-a.html

(Note: Please disregard what I wrote at the beginning of the thread; refer to post # 7 and onward.)

Second, please read below. This is the latest information I have re: the problem (from further testing):

********************************

1: kd> !irp ffffe00048626ca0
Irp is active with 3 stacks 2 is current (= 0xffffe00048626db8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[IRP_MJ_POWER(16), IRP_MN_WAIT_WAKE(0)]
0 0 ffffe00048c91060 00000000 fffff8009c42cb80-ffffd00022abc8c0
\Driver\pci dxgkrnl!DpiFdoPowerCompletionRoutine
Args: 00000000 00000000 00000000 00000002
>[IRP_MJ_POWER(16), IRP_MN_SET_POWER(2)]
0 e1 ffffe00049184160 00000000 fffff803fdd0bcc8-ffffe00047f15f00 Success Error Cancel pending
\Driver\nvlddmkm nt!PopRequestCompletion
Args: 00041100 00000001 00000001 00000002
[N/A(0), N/A(0)]
0 0 00000000 00000000 00000000-ffffe00047f15f00

Args: 00000000 00000000 00000000 00000000

********************************

That's all I have right now. Please advise. This problem has been going on for a couple days now.

Did try Display Driver Uninstaller and reinstalled the latest NVIDIA drivers for my GTX 660. Nothing.

Would appreciate any and all help anyone has to provide. Thanks!

EDIT: PC specs are listed in the first post in the thread I linked to above.

:)

 

BSoD Analysis request

TOSHIBA ACPI-Based Value Added Logical and General Purpose Device Driver

Driver Reference Table (DRT)

 

BSoD Analysis request

No dump file is created despite that I followed the instructions in this link:

How to read dumpfiles after a blue screen of death

But the BSoD says it is "tvalz_o.sys"

Thank you for the quick response

 

Hi Omnimaxus,

Please read How to upload files

As it looks like a problem with your GPU's, for the part you are posting, and you have already reinstalled the drivers, please test your GPU's.
Please note the temperatures of your GPU's when idle and under load





Diagnostic test

GPU TEST


Run Furmark tutorial



Note Run Furmark for around 30 minutes



Warning Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high

Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

 

axe0 - thanks! I will give Furmark a try, eventually. I'll report back here later on.

 

Update:

OK. Had to stop Furmark after 5 minutes. The temperature rose quickly to 82 Celsius, but stayed there until I stopped the test. No graphical artifacts showed up. Here is a partial screenshot of the top left corner from my monitor when I had Furmark running. Also, I tried the SystemInfo utility, but both Internet Explorer and Firefox kept leading me back to SevenForums, and not TenForums.

So, thoughts? Thanks.

 

Please read How to upload files

Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

 

Follow-up:

Hello. Here is a ZIP file with everything you will need (see attached). I exported all the information from the MSINFO32 file into a text file, and edited out my personally identifiable information. I did the same with the other .txt files. I hope that isn't a problem. But again, here is the ZIP file with everything (including the most recent .dmp file). Also, I have added my system specs, as you can see for yourself. I honestly hope this is enough for you (axe0) or someone else to help me. Really would like to get to the bottom of this. Thanks!

 

Hi Omnimaxus,

The problem is now, I cannot read some files properly because they are modified.
I mean, I cannot read the msinfo32 file properly in a text file.
I could try it, but it takes a lot more time to find everything in the msinfo32 file that might be important.
Please upload a new zip, modify some files for your privacy, but please do not convert them into other files.

 

Hi, axe0. I already modified the resulting .txt files to omit certain information so to maintain my privacy. That's what I did in the first place; "modify some files for (my) privacy," as you suggested. I will PM you shortly. Thanks for your help so far.

 

Modifying the files isn't something I would suggest, if you would ask me I would say to leave the files as they are.
It is only for respect for your privacy.

 

Computer name - Change in Windows 10

 

Thanks, axe0. I'm sorry, but that wasn't what I was looking for. I was referring to changing the name of my user profile. The link you provided even says that the method discussed won't work for that purpose (see post # 6). (Just FYI - but thanks.) Anyway, I went online and found a NFO file editor, and used that to edit out all personally identifiable information from the MSINFO32 file. I also edited all other files, and saved them in their original format. Now you should be able to view everything (especially the MSINFO32 file) without any problems (use the System Information utility to open MSINFO32). OK? I really appreciate your time and help.

(See attached ZIP file below.)

Please let me know what you find. Thanks again.

P.S.: Everyone - the NFO editor I found is named NFOPad. Can find it here.

 

As you stated that within a few minutes the temperature of the GPU is coming at around 80C and you have cancelled it because of that.
But, can you try to run Furmark again? Running on temperatures around 85C is only something to worry when it is very frequently and the GPU could run around 90-95C with a good cooler.


Note This information counts only for this GPU
What cooling system do you have?

There are lots of errors from Windows applications.
Please try following:

• Open an admin command prompt
• Copy/paste "sfc/scannow" (without quotes) and press enter
• When it finished reboot your system
• Open again an admin command prompt
• Enter sfc/scannow again

If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation" after the second SFC, please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

In case of

Please check logitech for driver updates
Please check the following links for driver updates
http://www.carrona.org/drivers/drive...d=wdcsam64.sys

http://www.wacom.com/en/customercare/drivers.aspx for the Wacom drivers

http://www.carrona.org/drivers/drive...id=rawdsk3.sys

http://www.egistec.com/oem-acer001/program-update.aspx
Code: 3: kd> lmvm wdcsam64 start end module name fffff800`75940000 fffff800`75943880 wdcsam64 (deferred) Image path: \SystemRoot\System32\drivers\wdcsam64.sys Image name: wdcsam64.sys Timestamp: Wed Apr 16 10:39:08 2008 (4805BB2C) // Needs updating! CheckSum: 0000D887 ImageSize: 00003880 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4 3: kd> lmvm wacomrouterfilter start end module name fffff800`733f0000 fffff800`733fa000 wacomrouterfilter (deferred) Image path: \SystemRoot\System32\drivers\wacomrouterfilter.sys Image name: wacomrouterfilter.sys Timestamp: Wed Aug 06 20:10:12 2014 (53E26F84) CheckSum: 0000921E ImageSize: 0000A000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4 3: kd> lmvm wachidrouter start end module name fffff800`729e0000 fffff800`729fd000 wachidrouter (deferred) Image path: \SystemRoot\System32\drivers\wachidrouter.sys Image name: wachidrouter.sys Timestamp: Wed Aug 06 20:10:05 2014 (53E26F7D) CheckSum: 00023A5F ImageSize: 0001D000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4 3: kd> lmvm rawdsk3 start end module name fffff800`73090000 fffff800`7309c000 rawdsk3 (deferred) Image path: \??\C:\Windows\system32\drivers\rawdsk3.sys Image name: rawdsk3.sys Timestamp: Tue Feb 11 22:10:17 2014 (52FA91B9) CheckSum: 0000B993 ImageSize: 0000C000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4 3: kd> lmvm PDFsFilter start end module name fffff800`759d0000 fffff800`759e8000 PDFsFilter (deferred) Image path: \SystemRoot\system32\DRIVERS\PDFsFilter.sys Image name: PDFsFilter.sys Timestamp: Thu Aug 23 23:57:13 2012 (5036A739) CheckSum: 0001A15A ImageSize: 00018000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4 3: kd> lmvm lvbflt64 start end module name fffff800`72860000 fffff800`72864b80 lvbflt64 (deferred) Image path: \SystemRoot\System32\drivers\lvbflt64.sys Image name: lvbflt64.sys Timestamp: Tue Oct 23 04:10:38 2012 (5085FC9E) // Logitech CheckSum: 0000DCDF ImageSize: 00004B80 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4 3: kd> lmvm lvuvc64 start end module name fffff800`75400000 fffff800`75887d80 lvuvc64 (deferred) Image path: \SystemRoot\system32\DRIVERS\lvuvc64.sys Image name: lvuvc64.sys Timestamp: Tue Oct 23 04:12:08 2012 (5085FCF8) // Logitech CheckSum: 004912C7 ImageSize: 00487D80 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4 3: kd> lmvm lvrs64 start end module name fffff800`761f0000 fffff800`76244000 lvrs64 (deferred) Image path: \SystemRoot\system32\DRIVERS\lvrs64.sys Image name: lvrs64.sys Timestamp: Tue Oct 23 04:11:24 2012 (5085FCCC) // Logitech CheckSum: 00058CF8 ImageSize: 00054000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4[/quote]

 

Thanks - unfortunately, I do not have the time today to devote myself 100% to this problem today. I will try tomorrow. I should add that when I had Windows 8.1 (with "Update") installed, I did not have this problem. It emerged only after installing Windows 10. Not sure if that will help. I will follow your advice, but not right now. Meantime, do you have any actual thoughts about what is going on? Unsure about when I will check back here again, but it will be later. Thanks again.