Windows 10: Restarts to boot menu and internal sotrege error when inserting two different SD cards

Greetings everyone!

When I insert a SD card, my computer restarts to boot menu, at a random time when the SD card is inserted, , and loops when ever I try to select windows. There are no other options, and I do not have installed any other systems. It does boot into windows if I press CTRL + ALT + DELETE

When I insert a different type of SD card, I get internal storage error.

I have tried to troubleshoot, running sfc scannow, looking at the event viewer without finding anything strange, updating the drivers manually and searching for a windows update.

The first SD card is ADATA SD HC 4 GB, the second is Verbatim SD HC 32 GB.

I'm using windows 10 home, version 10.0.19041 on a LENOVO Ideapad.

The error does not happen if the SD card is not inserted.

Thanks for reading this!

:)

 

SD card won't format

Hello Suvaan,

We would like to know why you are unable to make any activity on your SD card. To further look into this, can you tell us the error message that you are getting when trying to format, copy or delete files on the SD card? Have you tried any troubleshooting
steps? Which device are you using to format the SD card?

In the meantime, we suggest that you try inserting the SD card to a different device and see if you will encounter the same error. You can also try to remove the SD card, restart the device and then insert the SD card again to see if it will make a difference.

Regards.

 

sd card error

Hi,

This issue that you're experiencing when inserting an SD card into your computer's card reader can sometimes occur if your SD card is corrupted. For us to isolate this issue, please provide the following information:

• Is this the first time that you've experienced this issue? Were there any programs or Windows update that was installed on your device prior to this issue?
• Have you tried inserting a different SD card into your device to check if the same issue will persist?
• What troubleshooting steps have you tried so far?
• If possible, send us a screenshot showing the complete error message that you're getting.

Looking forward to your response.

 

Windows asks to format USB Drive when SD card is inserted

I have SD card with Raspbian OS on it. When I insert the card using the card reader adapter, Windows asks me to format the E:\ drive, and it shows two different drives where it supposed to be just one (the boot with Raspbian OS on it). Recently it also shows the message: "Location is not available E:\ is not accessible. The parameter is incorrect." but the boot is on I:\ drive and this E:\ drive should not even exist.

- When I format E:\ drive it shows empty E:\ drive and full boot on I:\ drive. When I eject the boot drive, both drives disappear, however, the I:\ (boot) drive is no longer working properly. (does not boot the OS on raspberry pi)

- When I reinsert the SD card it does not show me any errors. When I then format the SD card (I:\) boot drive, the E:\ drive disappears and I'm left just with I:\ drive. (when I put fresh Raspbian on I:\ drive, the error to format E:\ shows up again)

- When I put some files onto the SD card it does not seem to show any other drives when I eject and reinsert.

It is only happening when I have an image located on the SD card.

I tried:

• Different USB ports
• Different SD card readers / adapters
• chkdsk /F /R /X I: (from the command line)
• chkdsk /F /R /X E: (from the command line (is says that the file system is RAW))