Windows 10: Route to the remote station with win route table

Hello,

I have three pc's:
- Local PC with an ip 192.168.1.100
- Remote PC_1 with an ip 192.168.2.100
- Remote PC_2 with an ip 192.168.2.101
I would like to access remote pc_2 via remote pc_1. On the local pc and remote pc_1 i have enabled routing in the registry. Windows ip configuration shows as follow:
Windows IP Configuration

Host Name . . . . . . . . . . . . : (PC name)
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
I have installed teamviewer on local pc and remote pc_1 and a vpn adapters of the teamviewer and established vpn connection betwean local pc and remote pc_1.
On the local pc i have added a route to the route table:
route add 192.168.2.0 MASK 255.255.255.0 (ip of the teamviewer vpn of the remote pc)
Route was added successfully, i have route in the route table:
Active Routes:
Network Destination Netmask Gateway Interface Metric
192.168.6.0 255.255.255.0 (remote vpn ip) (local vpn ip) 56
Now from the local pc i can ping to the address 192.168.2.100:
C:\Windows\system32>ping 192.168.6.253

Pinging 192.168.2.100 with 32 bytes of data:
Reply from 192.168.2.100: bytes=32 time=238ms TTL=128
Reply from 192.168.2.100: bytes=32 time=107ms TTL=128
Reply from 192.168.2.100: bytes=32 time=123ms TTL=128
Reply from 192.168.2.100: bytes=32 time=108ms TTL=128

Ping statistics for 192.168.2.100:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 107ms, Maximum = 238ms, Average = 144ms
I can also ping succesfully from the remote pc_1 to the remote pc_2, but when i try to ping from local pc to remote pc_2 - all packets are lost. Any help is highly appreaciated.
Local pc is Windows 10 pro 1909 OS ver 19363.628. Firewalls, antivirus were temporary disabled while i did tests.

:)

 

Network Routing Tables


Hi everyone!


I recently started using a VPN. However some websites block VPN ips so I can't visit them.
To solve this problem I would like to add the blocked website's IP to my route table.
It works fine on my other laptops but on my PC it doesn't seem to function. I ran the following command as an administrator in my cmd. Got the OK! feedback message but I still get blocked from visiting the website when on a VPN.


Code:

Code:

Route add [website IP] [Default Gateway]

At the bottom of this screenshot :






you can see that the IP is indeed added to the list but sadly it doesn't function. I have been suggested to reinstall my Windows 10 but was wondering if there aren't any other solutions to this problem.


Thanks in advance!

 

is it possible to edit windows route table.

How to Add a Static TCP/IP Route to the Windows Routing Table - HTG

Denis

 

Network Routing Tables


What's nice is that you have a system that solved the issue to compare against.

Please post the full routing table

route print

Could it be IPv6 related?