Windows 10: SAFE_OS failure C1900101-20017 - in place upgrade. Maybe SCSI driver?

Discus and support SAFE_OS failure C1900101-20017 - in place upgrade. Maybe SCSI driver? in Windows 10 Installation and Upgrade to solve the problem; Trying to perform an in-place upgrade Win7-Win10 on a Del Prec. T5600. The process seems to be OK, but when it restarts it presents the troubleshoot... Discussion in 'Windows 10 Installation and Upgrade' started by jimhelfer, May 4, 2021 at 5:47 AM.

  1. jimhelfer Win User

    SAFE_OS failure C1900101-20017 - in place upgrade. Maybe SCSI driver?


    Trying to perform an in-place upgrade Win7-Win10 on a Del Prec. T5600. The process seems to be OK, but when it restarts it presents the troubleshoot screen, and then rolls back to Win7. if I open a command line, diskpart shows no disks but the media creation tool USB drive, so I suspect that I need to supply a driver for the scsi host controller. Herein lies the rub. I don't know of any way to get the in-place upgrade setup to ask for disk drivers. There does not seem to be a way to get to that particular screen. I can get there from a new installation, but for a bucket of perhaps not technical reasons, I would really prefer to do an in place upgrade here. Below is the marinara. I hope I have enough info here to get pointed in the right direction. Dell Precision T5600 A19 BIOS Intel C600 host controller 2 WD drives - Legacy boot- AHCI mode - no RAID Thanks

    :)
     
  2. jimhelfer Win User

    SAFE_OS failure C1900101-20017 - in place upgrade. Maybe SCSI driver?

    Trying to perform an in-place upgrade Win7-Win10 on a Del Prec. T5600. The process seems to be OK, but when it restarts it presents the troubleshoot screen, and then rolls back to Win7. if I open a command line, diskpart shows no disks but the media creation tool USB drive, so I suspect that I need to supply a driver for the scsi host controller.

    Herein lies the rub. I don't know of any way to get the in-place upgrade setup to ask for disk drivers. There does not seem to be a way to get to that particular screen. I can get there from a new installation, but for a bucket of perhaps not technical reasons, I would really prefer to do an in place upgrade here.

    Below is the marinara. I hope I have enough info here to get pointed in the right direction.

    Dell Precision T5600 A19 BIOS
    Intel C600 host controller
    2 WD drives - Legacy boot- AHCI mode - no RAID

    Thanks
     
  3. bacontf2 Win User
    BSOD while upgrading to Windows 10, error C1900101-20017


    Hi, I've tried 11 times to upgrade to Windows 10, but every time, no matter what I try, I am confronted with a blue-screen after the first restart in the upgrade process. Upon rebooting, I get a box pop up which tells me I have got error C1900101-20017 and "The installation failed in the SAFE_OS phase with error during BOOT operation". When I click ok, Windows 7 loads once again.

    I have tried:
    • Updating all of my drivers
    • Uninstalling my antivirus (re-installed it now since it didn't work)
    • Unplugging unnecessary peripherals
    • Clean boot (nothing running on startup)
    None of these have changed a thing.

    Someone on Reddit is saying they managed to get it fixed by switching to UEFI boot mode, but I can't find that option in my BIOS.

    Here is the minidump thing:
    Attachment 27120
     
  4. SAFE_OS failure C1900101-20017 - in place upgrade. Maybe SCSI driver?

    Win 10 Pro Install Fails With Error C1900101-20017

    My system update from 8.1 Pro/64 to Win 10 fails with the error message C1900101-20017 ("The installation failed in the SAFE_OS phase with an error during BOOT operation"). I have tried every suggestion
    I could find on this error to no avail. have been trying to upgrade for 4 days, so if anyone has a new solution that works please kindly help.
     
    Coconut Candy, May 5, 2021 at 8:35 AM
    #4
Thema:

SAFE_OS failure C1900101-20017 - in place upgrade. Maybe SCSI driver?

Loading...
  1. SAFE_OS failure C1900101-20017 - in place upgrade. Maybe SCSI driver? - Similar Threads - SAFE_OS failure C1900101

  2. Failure to sleep solved by in-place upgrade

    in Windows 10 Support
    Failure to sleep solved by in-place upgrade: For as long as I can remember, I've had a power plan that turns off the monitor ten minutes of inactivity and puts the system to sleep after thirty minutes. Recently the system stopped sleeping. After numerous failed attempts to correlate this with some specific windows...
  3. Windows in place repair upgrade failure

    in Windows 10 Installation and Upgrade
    Windows in place repair upgrade failure: This is a part two to my orginal post as the repair upgrade failed and i dont know what to do. It rolls back Original link here[IMG] https://answers.microsoft.com/en-us/windows/forum/all/windows-in-place-repair-upgrade-failure/e4b9e6e8-df1a-455f-9160-d416d3cba31a
  4. Windows 10 In-place Upgrade fails : Error: "Installation failed in the SAFE_OS phase with...

    in Windows 10 Installation and Upgrade
    Windows 10 In-place Upgrade fails : Error: "Installation failed in the SAFE_OS phase with...: I provide IT Support to various clients and have had two Windows 7 PCs recently fail to upgrade to Windows 10 using Media Creation with the same error. Installation failed in the SAFE_OS phase with an error during REPLICATE_OC operation The 1st time this happened, I...
  5. Adaptec 39320A SCSI drivers

    in Windows 10 Drivers and Hardware
    Adaptec 39320A SCSI drivers: You can download and use the Windows 7 drivers from the Adaptec support site, these seem to work fine (at least on x64). Other Adaptec cards may also work using the Windows 7 drivers. HtH Dave 16240
  6. BSOD while upgrading to Windows 10, error C1900101-20017

    in Windows 10 BSOD Crashes and Debugging
    BSOD while upgrading to Windows 10, error C1900101-20017: Hi, I've tried 11 times to upgrade to Windows 10, but every time, no matter what I try, I am confronted with a blue-screen after the first restart in the upgrade process. Upon rebooting, I get a box pop up which tells me I have got error C1900101-20017 and "The installation...
  7. Installation Hangs at Blue Windows Logo, Error Code C1900101-20017

    in Windows 10 Installation and Upgrade
    Installation Hangs at Blue Windows Logo, Error Code C1900101-20017: So here's the lowdown: My PC used to run Windows 7 Ultimate (but it wasn't Genuine). To prevent any potential future problems with Windows 10 from Windows 7 Ultimate not being Genuine, I reverted back to Windows 7 Home Premium which I had my product key laying around for....
  8. C1900101-20017 SAFE_OS phase

    in Windows 10 Installation and Upgrade
    C1900101-20017 SAFE_OS phase: ​Hi, can't update from win 7 to 10 , tried from win update and from usb and from hdd, the same error all the time, can someone help me? have attached log. thanks in advance 49572
  9. Failure to install in SAFE_OS phase???

    in Windows 10 Installation and Upgrade
    Failure to install in SAFE_OS phase???: With an error during the APPLY_IMAGE operation??? Trying to install Windows 10 from Windows 7 (64 Bit) on a spare Acer Aspire 5738. Have tried a couple of times but it always comes up with this error message and reverts back to Windows 7. Any ideas??? [img] 28076
  10. Windows 10 Upgrade C1900101-20017 Error

    in Windows 10 Installation and Upgrade
    Windows 10 Upgrade C1900101-20017 Error: So I've been trying to update my PC to Windows 10 and keep getting this error!!! First I'll give you specifics about my PC. Alienware Aurora R4, came with an AMD R9270 GPU and I changed to a GTX 980. It came with one HardDrive which I replaced with an SSD and moved OS to...