Windows 10: Scanner lost with latest upgrade

can i get my scanner back with no fuss, or can i revert to and upgrade of windows 10 that allows the scanner back

:)

 

Fingerprint Scanner Not Working

Hello Gary,



Thank you for posting on Microsoft Community.

To resolve this issue try the following steps:

• 
  Have you updated the driver for the Finger Print scanner? If not, check on the manufacturer’s website (HP).
  
• 
  Check if installing the latest driver of the fingerprint scanner allows you to login using a Microsoft Account?
  

This issue might occur due to driver incompatibility since upgrading to Windows 10.



If you have the raw executable file of the corresponding driver for the validity sensor, I would suggest you to install the downloaded driver file in compatible mode with Windows 7 or 8. Refer to the following steps to do so.

• 
  Right click on the driver, and click on Properties.
  
• 
  Go to the Compatibility tab.
  
• 
  Check the box for Run this program in compatibility mode for:
  
• 
  Select Windows 7 in the list of Operating systems.
  
• 
  Click OK.
  
• 
  Double-click the driver file to install the driver and follow the onscreen instructions.
  
• 
  Reboot your computer.
  

Hope the above steps help.



Thank you.

 

Microtek scanner on Win 10 Pro

Hi Jean,

To get better clarity on the issue, kindly answer the questions below:

• Is the scanner detected under Devices?
• Were you able to see the scanner on the Device Manager?
• Have you installed the latest driver for the scanner?

We suggest you to run the troubleshooter for hardware and devices. To do this, follow the steps:

• On the Start menu, type Troubleshooting and hit enter.
• Choose Hardware and Sound.
• Select Hardware and Devices and run the troubleshooter.

If issue persists, we suggest you contact the manufacturer to get better assistance.

Do let us know if you need further assistance.

 

No scanners were detected

I tried using my Windows Fax and Scan like I usually do. I get this error:

No scanners were detected. If a scanner is installed, make sure that it is powered on and connected to the computer and then try again. For information about adding or troubleshooting scanners, see Help and Support.

I searched on Windows website and found this:

Method 1:

I would suggest you to run “Hardware and Devices” troubleshooter to diagnose the exact issue.

Follow these steps to run the troubleshooter:

• Press “Windows key + X”.
• Type “Troubleshooting” without quotes in the Search box and hit enter.
• Select “Hardware and Sound” from the Troubleshooter Window.
• Select “Hardware and Devices” under Devices option.
• Follow the On Screen instructions.

Method 2: Un-install and re-install latest scanner drivers from the manufacturer’s website and see if that helps:

Follow these steps:

• Press “Windows Key + X” from the keyboard.
• Type “device Manager” without quotes in the search box and hit enter.
• Right click on the scanner drivers and select “Uninstall”.
• Restart the computer once it is uninstalled.
  
  This was not helpful.