Windows 10: SFC Scan error unable to repair

Hi sorry if this is the wrong section its my first time posting here. My windows 10 recently have had a lot of Explorer exe crashes (task manager) and it wouldn't boot up properly and i finally got it to work after a fresh installation of the os again. I took some advice and did a sfc scan, it said that there was corrupted file that it couldn't fix. I was wondering if someone could help me find out what the problem and a way to fix it thanks. i cant post the file because it is 6.02mb out of the limit of 2mb is there another way i can post this?

:)

 

SFC Scan unable to repair some files

Hi,

Thank you for your reply.As you suggest I run DISM and in log file.

2015-08-15 08:08:52, Info DISM DISM Provider Store: PID=9096 TID=7696 Connecting to the provider located at C:\WINDOWS\system32\Dism\FfuProvider.dll. - CDISMProviderStore::Internal_LoadProvider

[9096] [0x8007007b] FIOReadFileIntoBuffer1250): The filename, directory name, or volume label syntax is incorrect.

[9096] [0xc142011c] UnmarshallImageHandleFromDirectory793)

[9096] [0xc142011c] WIMGetMountedImageHandle3046)

2015-08-15 08:08:52, Info DISM DISM WIM Provider: PID=9096 TID=7696 [C:\] is not a WIM mount point. - CWimMountedImageInfo::Initialize

2015-08-15 08:08:52, Info DISM DISM VHD Provider: PID=9096 TID=7696 [C:\] is not recognized by the DISM VHD provider. - CVhdImage::Initialize

2015-08-15 08:08:52, Info DISM DISM Provider Store: PID=9096 TID=7696 Getting Provider VHDManager - CDISMProviderStore::GetProvider

2015-08-15 08:08:52, Info DISM DISM Provider Store: PID=9096 TID=7696 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider

2015-08-15 08:08:52, Info DISM DISM VHD Provider: PID=9096 TID=7696 [C:\] is not recognized by the DISM VHD provider. - CVhdImage::Initialize

2015-08-15 08:08:52, Info DISM DISM Imaging Provider: PID=9096 TID=7696 The provider VHDManager does not support CreateDismImage on C:\ - CGenericImagingManager::CreateDismImage

2015-08-15 08:08:52, Info DISM DISM Provider Store: PID=9096 TID=7696 Getting Provider WimManager - CDISMProviderStore::GetProvider

2015-08-15 08:08:52, Info DISM DISM Provider Store: PID=9096 TID=7696 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider

[9096] [0x8007007b] FIOReadFileIntoBuffer1250): The filename, directory name, or volume label syntax is incorrect.

[9096] [0xc142011c] UnmarshallImageHandleFromDirectory793)

[9096] [0xc142011c] WIMGetMountedImageHandle3046)

2015-08-15 08:08:52, Info DISM DISM WIM Provider: PID=9096 TID=7696 [C:\] is not a WIM mount point. - CWimMountedImageInfo::Initialize

2015-08-15 08:09:08, Warning DISM DISM OS Provider: PID=4584 TID=7560 Unable to set the DLL search path to the servicing stack folder. C:\Windows may not point to a valid Windows folder. - CDISMOSServiceManager::Final_OnConnect

And so on. If it possible where I can send this log file.

Thank you



Had the same problem here in this forum.

Cannot get "CCC" ATI Catalyst Control Center to run in Windows 10

And tried this.

catalyst control center: host application has stopped working

Still CCC not running and my fan is at Max speed.

 

SFC Scan unable to repair some files

Hi,

To start, press this key combination: CTRL+SHIFT+ESC

If this opens Task Manager and that window is NOT flickering:

The likely cause is Software Compatibility issue causing Explorer.exe to crash repeatedly.

• Use the File, Run option in Task Manager to open additional tools as-needed. Be sure to check the box to run tools as Administrator. These could include:
  
  appwiz.cpl: Opens Programs and Features
  
  compmgmt.msc: Opens Computer Management
  
  cmd.exe
• You can search for crash events in the Event Logs and find if any third party DLLs are the faulting module in the Explorer,.exe crashes Or uninstall software that is likely to include shell extensions.
  
• If removing software does not resolve the issue, use these commands to repair Windows:
  
  dism /online /cleanup-image /restorehealth
  
  sfc /scannow

We have reports that removing these apps help resolve the issue:

• Norton Antivirus
• Other AV solutions
• iCloud
• IDT Audio (faulting module IDTNC64.cpl)

If Task Manager is flickering, or it didn’t open, proceed with display driver troubleshooting:

The likely cause is a display driver or display hardware issue.

• Boot to Safe Mode with Networking.
• Use the same steps here as for Black Screen issues – if dual chipset, disable built-in graphics, if still flickers, try with only the other chipset enabled.
  
• If this does not work, or there is only a single chipset, uninstall the device and remove the driver software.
  

[*]Then boot into Windows and update the drivers to the latest from the manufacturer.

Hope this helps in resolving the issue. If the issue persists, do get back to us. We will be happy to assist you.

 

Hi and welcome to Tenforums.
The System File Checker (sfc /scannow), sometimes needs to be run several times, with reboots in-between, before things get fixed. Please see the tutorial here:
SFC Command - Run in Windows 10 - Windows 10 Forums

If after at least 3 runs, with reboots in-between, you still have issues, please open an Administrative Command Prompt, and type
Code: findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >"%userprofile%\Desktop\sfcdetails.txt"[/quote] Find the text file on your desktop, and paste it here so we can have a look at what's being flagged.

 

Hi I tried to do a reboot but My start bar froze and my laptop started lagging when I dragged my mouse so I held the power button did a reset and now it's on Windows 10 loading screen with the spinning dots

Edit: update it just done in that screen and now I'm staring at a blank grey screen

 

Oh - sorry I was afk for a bit. What's it doing now?

 

It's still a grey screen my system restore point was deleted I made one last night in case of any problems I just did a reset rn haven't checked on it yet

Update: it finished the reset and is now on a black screen no cursor not sure what to do I could do a fresh reinstall of wins 10

Update: I reformatted I see that Windows 10 isn't compatible with my Intel 4600 graphics the drivers are unable to be installed

 

Hmmm...not sure about that.
Drivers & Software

First one on the list was just released a little over a week ago.

 

Yea I'm not sure either but I have the Windows update saying error to install for this graphics I looked it up on the Internet and a lot of people were having problems with it. Do you think I should disable it? My laptop has dual graphics a nvidia and a Intel one but my Intel one is for my display so I'm not sure if I should touch it or leave it be.

 

So you formatted and clean installed, and that's when you got the error? I would think you should be able to disable the integrated video (Intel), and just use the nVidia. Did W10 install, without the Intel graphics?

 

I can not load the onboard Intel 4600 graphics driver either for 8.1/10
Worked fine with the OEM Windows 8 OS

 

Windows 10 update tried to instal Intel graphics drivers but it failed and when I manually tried it failed and sometimes killing a task with manager would freeze up my whole laptop

 

See if this helps any

Download the ZIP package from here:
64 bit: Download Intel Graphics Driver for Windows 10 [15.40][4th Gen]

There isn't a 32-bit download for Windows 10
Intel® Graphics Driver for Windows 7/8.1 32-bit [15.36]


Follow these instructions.
How to Manually Install an Intel Graphics Driver in Windows 10 &...