Windows 10: Shutdown during Partition, Windows 10 won't boot to desktop

I was shrinking my Volume F and adding the free space to Volume C basically, partitioning. That is when the electricity went off and the pc windows 10 shut down. When I started it once again it asked me to select my language and after that I was asked to choose two options:1. Troubleshoot2. Shut down this pcAlso th

:)

 

ShutDown button in desktop (Win-10)

Hi Marcel,

Thank you for your interest in Windows 10.

You can create shortcut for Shutdown, restart and sleep by following the below steps:

• First right-click on the desktop, choose New and then Shortcut.
• In the shortcut location box, you’ll need to enter the correct command, which I’ve listed for you below.
• For Shutdown type the below command:

Shutdown.exe -s -t 00

• For Restart type the below command:

Shutdown.exe -r -t 00

• For Sleep type the below command:

rundll32.exe powrprof.dll,SetSuspendState 0,1,0

After you click Finish, you should now have a new icon that you can double-click to immediately shutdown, restart, or lock your computer.

Hope this information helps, for further assistance please reply.

 

How does Windows boot to advanced recovery option e.g. command prompt?

- that gives me a 454 'Unexpected error' This tells me that the BCD is partially corrupted.

The commands: shutdown.exe /r /o /f /t 00
or: %SystemRoot%\System32\Cmd.exe /c reagentc /boottore&shutdown /r /f /t 00
should boot into Recovery if everything is configured correctly.
FYI, If Windows is configured correctly:

1. If Reagentc is disabled, you still can get into Recovery but with limited options.
2. If Reagentc is enabled, you'll get all options.
3. If you boot Windows using Recovery USB stick, You'll get into Recovery with couple of options missing.

Here's my suggestion if you want to try:
OPTION 1: Will save the trouble of re-install Windows.

1. Download the image of my first 3 partitions (450MB Recovery, 100 MB EFI partition, and 16MB unformatted primary)
   EFI_Boot-00-00.7z - Google Drive
2. Run Macrium and restore the image from step 1, overwriting your existing 1st three partitions, leaving C alone.
3. Delete the 490MB Recovery partition.
4. From Macrium, run fix boot problems.
5. Reboot. Open Admin command prompt then run Reagentc /info to make sure that it is enabled. If not, enable it.
   if failed to enable, reboot and try again.

OPTION 2: Assuming you've already had Windows backup with Macrium.

1. Wipe out the first 5 parttiions. (450MB, 100MB, 16MB, C Drive, 480MB)
2. Fresh install Windows 10
3. Restore C drive from backup image, run fix boot problems
4. repeat step 5 from OPTION 1 above.

 

ShutDown button in desktop (Win-10)

yeah it works but i have another problem with this combination.

Shutdown/Restart shortcut force windows to shutdown without letting other apps to save their data, that is a bit nuisance.

for eg:

Utorrent is force closed and when i start the pc, it re-calculate all the toorents in the list even those that are already downloaded and currently in seeding state. It happens when utorrent is not closed properly.

So is there any way to NORMALLY shutdown/restart/loggoff/lock windows pc?