Windows 10: side by side configuration

Windows 10 - WORD won't open. It states that side by side configuration is incorrect. I have little computer knowledge, but have tried everything various sites have recommended.

:)

 

is there any demand for a system configurator?

Processor(V) <--drop down arrow
-AMD(V)
--Socket(V)
---AM2(V)
----List of cpu's
---939(V)
----List of CPU's
-Intel(V)
--Socket(V)
---775(V)
----List of cpu's
---771(V)
----List of CPU's


etc etc.

 

Need Serious Help: How To Record Video of What is Done on my PC?

I suggest the following simple steps:

1. Set the autosave options in MS Office to a low value say 5 minutes.
2. Setup file history to autosave frequently - the shortest period is 5 mins
3. Install Macrium Reflect Free and configure it to do a daily incremental system backup

You should be well covered if you do the above to protect your key files.

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs