Windows 10: Sleep issue

After the system goes to sleep once I awake it it hangs at the Windows screen (where time is shown left corner). After a bit I'm greeted with BSOD stating...


DPC WATCHDOG VIOLATION


This is a clean install of Windows 10 Pro 1909 18363.535. When I hit the power button (after the diagnostic runs) it shuts off then I'm able to restart the desktop without issue. All my drivers are current and report no issue/s.



System specs:


Gigabyte GA-Z68XP-UD3 rev 1.0 (Award BIOS F10 latest)

Core i7 3770K

32GB G-Skill DDR3 RAM (CL7-8-8-24)

Sound Blaster X-Fi Xtreme Gamer

LG Blue Ray DL

1TB Crucial MX500 SSD

1TB Mushkin RAW SSD

1TB Hitachi SATA3 7200rpm

1TB WD Black SATA3 7200rpm

Antec 650w PSU

Rosewill Mid Tower Challenger

:)

 

Sleep issues with Windows

Hi,

I understand the issue that you are currently facing, we will try the best we can to resolve your issue.

I suggest you to follow the steps below and check if that resolves the issue.

* Right-click on Start and Select Command Prompt (Admin)
from context Menu

* Type or Copy/Paste the below commands into it and hit Enter key

powercfg /devicequery wake_armed

• By executing this command, it will bring up all the device list that are configued to wake up your PC from sleep. Now it time to find the device which made you PC to come out of the sleep lastly. Go and execute second command
  now.

powercfg /lastwake

• 
  This will bring up the details of the device that made your PC to come out of the sleep lastly. Now go to the particular device properties and make changes accordingly to preventing that particular device to wake your PC from sleep.
  

Please get back to us with status so that we can assist you further.

 

Display and sleep settings

Hi,

In order to help you with the issue about the display and sleep settings, kindly answer the following questions:

• Have you tried the troubleshooting steps suggested by MVP Andre Da Costa? If you did, what were the results?
  
• For us to avoid redundancy of the troubleshooting process, what were the other steps you have done to resolve the issue?
  

We look forward to your next post.

Regards.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.