Windows 10: sleep problem with standby when both s1 and s3 shows under powercfg

My supermicro X9SRA board only have the option diable, s1, s3 under acpi.... but if i select s3 then under windows powercfg /a it would give standby (s1 s3)

and that seems to be the problem that i can't properly wake the computer after it goes to sleep and power down everything. a touch of the keyboard would wake up the fan but you just have a blank screen and an unresponsive computer...

conversely, i notice a few other computers i have where s3 sleep works properly, under powercfg /a, you only have standby (s3)

is there a way to tell windows to specifically only use s3 when both s1 and s3 standby are listed under powercfg /a ?

:)

 

PC standby(sleep) problem

You may wanna try "powercfg.exe" command to help sort out which devices/settings are/maybe causing your problem.
You can use it to help diagnose S1/S2/S3/etc. problems, device problems, sleep state problems/compatibility caused by hardware/software, and more.

Links below:

Use PowerCfg in Windows 7 to Evaluate Power Efficiency
How do I: Use PowerCfg in Windows 7
Powercfg Command-Line Options
Good document from Microsoft: Using PowerCfg to Evaluate System Energy Efficiency
Use new Powercfg Options to Find and Fix Energy-Related Problems

Basic Diagnostics for Hibernate and Sleep

How to Troubleshoot a Vista or Windows 7 Sleep Mode Problem@Windows Vista forums

Google info
*Smile

 

Desktop PC won't go to hybrid sleep

No other recent changes. No error messages.

I ran powercfg /a . It shows hybrid sleep not available. I'm not sure what it would have showed prior to this, but the PC would enter hybrid sleep.

The following sleep states are not available on this system:

Standby (S1)

An internal system component has disabled this standby state.

Graphics

Standby (S2)

The system firmware does not support this standby state.

An internal system component has disabled this standby state.

Graphics

Standby (S3)

An internal system component has disabled this standby state.

Graphics

Standby (S0 Low Power Idle)

The system firmware does not support this standby state.

Hybrid Sleep

Standby (S3) is not available.

I did see the same problem reported and it shows 10 others have the same problem.

https://answers.microsoft.com/en-us...vailable/6f8b0953-d780-4b47-8432-b771511099eb

 

PC won't wake from S3 Sleep after Win 10 upgrade


This was working fine on Win 8.1, but since my upgrade my PC now won't wake up from any keyboard, mouse or PC power button press once in S3 sleep or hibernation.

The only way to wake the PC is to reach back to the PSU and turn the power off, wait 5 seconds, then turn the power back on. I can then press the power button on the front of the PC and Windows then resumes from sleep.

powercfg /A returns this:

The following sleep states are available on this system:
Standby (S3)
Hibernate
Hybrid Sleep
Fast Startup


The following sleep states are not available on this system:
Standby (S1)
The system firmware does not support this standby state.


Standby (S2)
The system firmware does not support this standby state.


Standby (S0 Low Power Idle)
The system firmware does not support this standby state.

I have the latest firmware on my relatively new Gigabyte 970A-D3P. Any ideas?