Windows 10: Slow network speeds, 'nesth int ip reset' fixes but breaks again after a while

Every once in a while, I get extremely slow network speeds 5Mbps download, 0.1Mbps upload when I usually get 100Mbps download and 100Mbps upload. The only way I found that helped this was to type 'netsh int ip reset' in the admin command prompt and restart my computer. However, my network gets slow again after a while so I have to type this command once or twice every day.Is there another better way to fix my problem?

:)

 

Slow Network speed

Hi Andrew,

I realize the inconvenience you are experiencing with the Internet speed.

I will certainly help you.

I appreciate you efforts in troubleshooting the system issue.

I suggest you to please follow the below steps to fix the network issue:

• Press Windows logo key + X key, and select
  Command prompt (Admin).
• Type netsh winsock reset and press
  Enter.
• Type netsh int ip reset and press
  Enter.
• Type ipconfig /release and press
  Enter.
• Type ipconfig /renew and press
  Enter.
• Type ipconfig /flushdns and press
  Enter.
• Restart the system after performing above steps.

If the issue still persist. Please refer to the link to
fix network connection issues in Windows 10.

https://support.microsoft.com/en-us/help/10741/windows-10-fix-network-connection-issues

Please reach back to us, if you still face the difficulty with Network speed. We will be glad to help you.

Thank you.

 

netsh int ip reset gives "access denied"

Many thanks for the help!

Following the steps in the video, I was able to "netsh int ip reset" with no errors, but I still get the following message when I try to connect the device named "Ethernet".

"Ethernet" doesn't have a valid IP configuration Not Fixed X

I'm on the verge of resetting the machine.

 

Network and internet

Hi,

Based on the details provided, it is also possible that your
TCP/IP
is not communicating with your network hub causing the IP conflict.
We recommend that you reset and reconfigure your TCP/IP.
Resetting and reconfiguring your TCP/IP
will help your network hub to communicate properly with your PC. To
reset and reconfigure your TCP/IP, follow the steps below:

Reset TCP/IP.

To do this, follow these steps:

• 
  Run
  Command Prompt
  as
  Administrator.
  
• 
  Run
  this command:
  
  • 
    netsh
    int
    ip reset
    and hit
    Enter.
    

Exit
Command Prompt
and
monitor your Network Connection.

Reconfigure TCP/IP.

To do this, follow these steps:

• 
  Run
  Command Prompt
  as
  Administrator.
  
• 
  Run
  these following commands:
  
  • 
    netsh
    int
    tcp set heuristics
    disabled
    
  • 
    netsh
    int
    tcp
    set global
    autotuninglevel=disabled
    
  • 
    netsh
    int
    tcp set global
    rss=enabled
    

Update us on how it goes.

Regards.