Windows 10: Small issue after upgrading to creator's update

To get rid of the error in event log I have navigated to:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-User Device Registration/Admin]
and changed "Enabled" to "0"
*Smile

 

which one, 37 or?

 

Still getting two App Container profile failed with error 0x800700B7 because it was unable to register the AppContainer SID.

On every boot.

 

the first error.
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\

i got that because INTEL does not deliver my USB 3.0 extensible host controller driver.
i now got (Microsoft) like that in device manager.
it should say Intel.

my external HDD is a USB3.0 to SATA device, therefor the controller XHCI i guess..
but in my case everything is working fine.
it just means it failed and it loaded the Microsoft driver, it does that later
i also got the log report of that one , but it is not reported as error when loaded later.

if you got that error with Internal HDD or SSD, it might need AHCI mode for SATA in BIOS.
or there is also an option at boot in my BIOS, called "Launch Storage OpROM Policy ".
with 3 Options .
1.do not launch
2.UEFI only
3.Legacy only

i need to set "do not launch" , otherwise i get this WudfRd error with my Internal SATA devices too.
i think you choose "Legacy" drivers for if you got older devices and drivers or MS default, not sure.
i installed a windows 8.1 SATA AHCI , it is working fine , but i need that OpROM set to "do not launch"

for my USB 2.0/3.0 , i kinda need to set Legacy to "enabled", otherwise my logitech mouse won't work without the logitech drivers or in safe mode.
or at least have it working in UEFI mode so it works in bios.

in your case , you might be lacking USB 3.0 drivers too, or maybe need to update chipset driver.
to get that controller function working .

--------------------------------------------------------------------------------------------------------------------------------------------
Microsoft.VC80.MFC , i think you need to install MS "Redist Visuals 2005 SP1 x86 & x64"
or visuals package atleast , i guess 2005 SP1

i think the error with display and harddrive are components in chipset too, install the chipset driver of motherboard. (setup.exe or a .inf)

and the skype error will be gone with next app updates *Smile
or press update button in store.
or redownload the app.

run a trouble shooter for windows updates too as admin, on each new build.
maybe disable Fastboot , to exclude fastboot from bugging drivers on boot or features.
especially during these tests.

i like to turnoff disc defrag for my SSD's after build update.

(edit: i think Intel does not make USB 3.0 drivers for Z77 Ivy bridge platform maybe , and more early motherboards are also missing it.)

edit 2
fastboot in windows 10 is at energy settings , "choose what power buttons do" page.
click to unlock feature on top of page.

then on bottom you can disable the checkbox then save settings.
reboot .

 

''Simply modify a value in Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WMI\Autologger seek for the appropriate GUID and modify a value from enabled 1 to 0. Reboot pc and the error is gone.*Smile''



What I did is roll through the F3 for that GUID and changed all instances to 0...hope that does it, will reboot and see.

***UPDATE*** that did the trick by going thru all instances (using F3) and changing them to 0 haven't gotten those Event ID errors.

 

App Container profile failed with error 0x800700B7 is still an error i'm getting, as well as The CldFlt service failed to start due to the following error: The request is not supported.

Any ideas?

 

Dunno what has been said but, the last shall we say, 'hot-fix', has eliminated that error msg.

 

BTW never got a response to this Post.......*Banghead

 

and yes...I did look at the settings....

 

earlier i saw a post where you replied: ''Simply modify a value in Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WMI\Autologger seek for the appropriate GUID and modify a value from enabled 1 to 0. Reboot pc and the error is gone.

''



What I did is roll through the F3 for that GUID and changed all instances to 0...hope that does it, will reboot and see.

***UPDATE*** that did the trick by going thru all instances (using F3) and changing them to 0 haven't gotten those Event ID errors."

what exactly is a guid? and how can i fix this error exactly? "Event 360 user device registration, Windows Hello for Business provisioning will not be launched. Device is AAD joined ( AADJ or DJ++ ): Not Tested User has logged on with AAD credentials: No Windows Hello for Business policy is enabled: Not Tested Local computer meets Windows hello for business hardware requirements: Not Tested User is not connected to the machine via Remote Desktop: Yes User certificate for on premise auth policy is enabled: Not Tested Machine is governed by none policy. See What's new in Active Directory Federation Services for Windows Server 2016 | Microsoft Docs for more details."

 

When you get an Error in Event Viewer (you have to go to Custom Views then Administrative Events to show these) it will list the GUID which is usually an alphanumeric number shown between brackets example:
{dbe9b383-7cf3-4331-91cc-a3cb16a3b538}
what I do is look below the Event ID shown (in the bottom half of the window) where you have two tabs General - Details...opening Details shows two selections... Friendly View an XML View find the GUID listed to copy the GUID an paste it regedit to do a search. For some reason you can't copy items shown in the General mode.

 

nvm i just found it, im an idiot.. thanks man!

 

after looking at this event id: 201, devicesetupmanager, A connection to the Windows Metadata and Internet Services (WMIS) could not be established, i found the guid but when i search for it in regedit its not coming up. it is: {FCBB06BB-6A2A-46E3-ABAA-246CB4E508B2}

any advice on how to fix this? i tried going to the path Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WMI\Autologger but i cant seem to find it *Sad

 

Have you looked in Services to see it is 'activated' or started? Sometimes things get turned off or toggled off or set to Manual.

 

Yea. I think thats what it was.. it keeps changing itself like some other services such as windows updates going backk to manual.. why is that u think?