Windows 10: Standard Hardware Security not supported

Can I fix this? "Standard Hardware Security Not Supported"?? How important is the need to fix this?? If I can fix this, how do I do it??


I have an HP 15 Running Windows 10. Laptop runs terribly. I'm not a computer Guru but I am learning. This Laptop was just given to me and I'm beginning to see why. LOL. There has to be ways to fix it. Even typing this out, It is lagging and I have to wait for the cursor to catch up with what I type.

I connect to a public hotspot wifi network. I know a lot of online problems are because of this. I need to know how much of the issues are due to public wifi, and how much are device issues.

Only security for the laptop that I am running now are Windows 10 supplied..

first thing I have found incomplete is this "Standard Hardware Security Not Supported"

1. Is this a major issue?

2. Can I fix this?

3. How do I fix this?

:)

 

Standard hardware security not supported

I'm replying to Jetta48's post since I'm building off of his reference, which is where I got the original information I used as the basis for my own facetious rant above. Reviewing the section related to Standard Hardware Security:

At the bottom of the Device security screen, one of the following messages will appear indicating the security capability of your device:

Your device meets the requirements for standard hardware security
This means your device supports memory integrity and core isolation and also has:

• TPM 2.0 (also referred to as your security processor)
• Secure boot enabled
• DEP
• UEFI MAT

As most PC systems built since the time of at least Vista and most probably during the later period of the WinXP era would contain hardware DEP and Secure boot was often enabled on higher-end systems even with Windows 8, these typically wouldn't be involved
in the display of this message for recent systems.

However, since both the TPM 2.0 and UEFI MAT hardware (really firmware) requirements are relatively new, either and often both of these might be involved on any system such as Jetta48's, since only the newest models might typically include these.

While looking for some of this info, I found the following Microsoft Docs article that provides some additional detail for these and other

Standards for a highly secure Windows 10 device.

Both the TPM and UEFI MAT are either described or include a reference to other documentation in their respective hardware or firmware sections.

Rob

 

Device Security - Standard hardware security not supported

motherboard should support UEFI , cpu with VT , and TPM , otherwise Standard hardware security not supported will be displayed

so enable UEFI in BIOS , enable TPM in bios , enable intel VT in bios

for more information

https://docs.microsoft.com/en-us/windows-hardware/design/device-experiences/oem-highly-secure

https://docs.microsoft.com/en-us/windows-hardware/design/device-experiences/oem-secure-boot

 

Device Security - Standard hardware security not supported

Hi there,

I recently replaced my Motherboard, CPU and Ram and now have Windows Defender Security Centre tell me that Standard hardware security not supported.

Why is this and what can one do to change this status?

Regards,

E