Windows 10: Static thing stuck on screen

A random little black static popped up on my screen, i tried rebooting my pc and nothing helped, i dont know why its there

:)

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

windows update stuck at installation screen and cannot get to desktop

Hi Sue,

To understand the issue better, I would like to ask some questions:

• Is the computer stuck in the Installing updates screen?
• For how long is the computer stuck in the screen?
• When was the computer last updated?
• Is the screen showing any percentage of installation?

Sometimes the installation might take a long time to install if the update is of large size. So, I suggest you to wait for sometime and check if the system boots to the desktop. If it is taking a longer time, then perform a Power Drain by following the steps
provided below:

• Shut down the Computer.
• Remove all power source (including battery if it is a laptop).
• Press and hold the power button for 15-20 seconds.
• Connect the power source and start the computer.
• After the computer boots to the desktop, suggest you to install all the pending updates.

Hope this helps. Keep us posted on the status for further assistance.

Thank you.

 

Can't connect to internet with computer set with static IP

My guess is that you made a typing mistake, e.g. typing 192.186 instead of 192.168. If this is not the case then I suggest this:

• Set the machine to DHCP.
• Check if you can ping your other machines.
• Mark and copy the command below with Ctrl+C.
• Press the Windows key+R
• Press Ctrl+V, then Enter.
  
• Repeat steps 2 to 5 for a static address.
• Post the results of Step 2 (twice!) plus the contents of the desktop file IP.txt.
  

cmd.exe /c ipconfig /all >> "%UserProfile%"\Desktop\IP.txt"