Windows 10: Stuck in a BSOD loop

Good morning all,


I expect this to be a lengthy post so I do apologise in advance but very grateful for any advice towards my problem.


So, long story short is I have upgraded my PC by replacing the motherboard, CPU and RAM. My previous build was the following:


CPU: i5-4690k

RAM: 2x8GB 1333mhz DDR3

Motherboard: Gigabyte GA-Z97P-D3

GPU: GTX 970 4GB

PSU: Corsair CX500M

HDD: 1TB

No SSD


I have kept the same GPU, PSU and HDD and have installed my new components which include:


CPU: Ryzen 5 1600x

RAM: Corsair Vengeance 2x8GB 2400mhz

Motherboard: Asrock B450M PRO-4 F


Plugged everything in and connected everything as it should and when I tried to boot I started getting blue screens stating: KMODE_EXCEPTION_NOT_HANDLED. I was told that because of Windows on the previous hard drive it cant seem to locate the settings I had before so a fresh install was needed. So I put Windows 10 onto a USB and tried booting from the USB, the Windows logo displays for no more than 2 seconds and then it blue screens or just restarts itself. Blue screens I have got:


KMODE_EXCEPTION_NOT_HANDLED

DRIVER_IRQL_NOT_LESS_OR_EQUAL

CRITICAL_PROCESS_DIED

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED


I have tried to research online but a lot of the solutions is booting into safe mode and I cant seem to do this, I cant get onto the desktop to boot from there, the f8 or shift-f8 function seems to do nothing, no option in BIOS to choose safe mode.


Could something be plugged in wrong place, could a PIN be out of place on the CPU even though its seated fine?


I have tried my RAM sticks in all 4 slots, one stick at a time, or 2 sticks and all display in the BIOS so it cant be the RAM.


I am at a loss now and the only thing I can think of to recover from this is to maybe get a new HDD and try and boot from USB to install windows onto new HDD?


Let me know your thoughts and any answers I could try, thank you so much.

:)

 

bsod loop device verifier ionmanager violation

Hi Tom,

To better assist you, provide the answers to the following questions:

• Have you made any changes on your device prior to the issue?
• What is the complete error message that you're seeing on the screen?

For the meantime, we suggest checking the answers on the following threads below which we found similar and helpful in resolving the issue:

Windows 10 Driver Verifier BSOD loop.. how to get out of it?

Windows 10 stuck in bsod reboot loop

Let us know if you need further assistance.

 

BIOS stuck in a loop.

Hello,

We would like to ask some additional information to better isolate the issue:

• Did you get any error messages?
• Have you tried to boot in Safe mode?

We suggest that you check the solutions provided on the links below:

BIOS-loop

Stuck-in-BIOS-loop

We will wait for your response.

 

Computer Stuck in Boot Loop

Hi,

We are glad that you tried some troubleshooting steps to fix the issue, but usually the issue occurs due to corrupted system file. In order for us to assist you, we suggest to check this thread and look for Deepika Gowda answer. It contains troubleshooting
steps pertaining to the issue:
Computer stuck with a reboot loop on Windows 10.

We look forward to your response.