Windows 10: System won't boot up after chkdsk /f help

Ok so I bought a new ssd and wanted to clone the stuff I had on the HDD onto the SSD using MiniTool.
While cloning the error:23 occured and it got stuck in a loop, so I restarted the pc.
I checked on the web and it said to run the command chkdsk /r which made my system restart and when the process completed some of my stuff disappeared. Like "cannot access desktop directory damaged or unreadable" so I searched it up and it says to run the chkdsk /f command. And here I am stuck when I restart the system is stuck at the Acer logo and the loading dots freezes. Is there a way to fix this?

:)

 

chkdsk c: /F

It might be an error on the drive. We suggests that you follow the troubleshooting steps below:

• Run Disk Cleanup utility to clear your junk files.
• Open an elevated CMD type sfc /scannow and hit Enter to run the System File Checker.
  
• Once the scan is completed, restart your computer. Remember to exit ChkDsk
  during boot.
• Next, again open CMD as admin type
  Dism /Online /Cleanup-Image /RestoreHealth and hit Enter to repair the Windows image.
• Now see if ChkDsk able to complete the scan.

Note: Before doing the steps, make sure you save a back up of your files.

Let us know how it goes.

 

chkdsk c: /F

We appreciate the response. I'm referring to Check Disk (chkdsk) utility tool. If you haven't tried yet, we suggest that you run a chkdsk by:

• Press Windows Key + X button to bring up the power user menu.
• In the power user menu, select the Command Prompt (Admin) option.Click Yes when you are presented with a UAC window requesting permission to launch the Command Prompt as Administrator.
• In the new Command Prompt window, type chkdsk E: /f /r /x. Here you should replace E with your drive letter.

This option will run chkdsk to check and repair disk errors in Windows 10. The “/f” parameter tells CHKDSK to fix any errors it finds; “/r” tells it to locate the bad sectors on the drive and recover readable information; “/x” forces the drive to dismount
before the process starts.

Keep us updated with the result.

 

Chkdsk /f

Hi,

The error message "Windows cannot run disk checking on this volume because it is write protected." is usually occurring if there is a write protection tab on your hard drive or the partition file system is corrupted or damaged due to malware infection or
other unknown reasons.

For us to provide an accurate solution, we would need you to answer the following questions:

• Which build and edition of Windows 10 is installed on your computer?
• What changes have you made to the device before this issue occurred?

For initial troubleshooting, we suggest entering the command chkdsk E: /f /r /x in Command Prompt. Take note that you should replace
E with the drive letter for your PC's hard drive or USB drive. Once done, check if the same issue persists.

Important: While performing chkdsk on the hard drive, if any bad sectors are found when chkdsk tries to repair that sector, any data available on it might be lost.

We'll be waiting for your response.