Windows 10: Teredo Tunneling adapter missing. Like reeeeaaallly missing.

Okay, so I've seen a bunch of people with similar issues, but no fixes seem to work for me. My Teredo Tunneling adapter just isn't on my pc. I've tried through hidden devices and add legacy devices in device manager, neither one makes Teredo even visible as an option. I've tried to disable/enable through command prompt with the 'netsh set state teredo" commands. I even broke down and reset my windows, to no avail. It was working fine yesterday for Xbox parties, and then I installed a new AMD graphics update. After restarting for that, I could safely forget about Xbox parties working again. If anyone has any ideas on how to fix, I've seemed to have exhausted too many.



x570 Gigabyte Aurous Elite Wifi

Windows 10

:)

 

Missing Microsoft Teredo Tunneling Adapter from Legacy Hardware

Hello,

Please try these suggestions:

Method 1:

Step 1: Modify TCPIPv6 Parameters through Windows Registry

1. Press “Windows” + “R” keys to load the Run dialog box.Type “regedit” and press Enter.
2. Inside Windows Registry, navigate (from the left pane) and highlight this key.
3. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters
4. At the right pane, double-click to modify the DisabledComponents key.
5. Set the DisabledComponents Value data to 0 (Zero) and select OK.
6. Close Registry Editor.
7. Restart your computer.
8. Navigate to device management.
9. Check if the Teredo tunneling adapter exists and working in device manager. To do that:

• From the View menu choose Show hidden devices.
• If the device manager's screen doesn't show any errors (and is without an exclamation mark) next to MS Teredo Tunneling Adapter then your problem is solved and the Teredo tunneling should work without problems.

If you face a screen with a yellow exclamation mark next to Microsoft Teredo Tunneling adapter.

Step 2: Uninstall all Teredo Tunneling Adapters & Interfaces.

1. Right-Click and Uninstall the Teredo Tunneling Pseudo-Interface.
2. Uninstall also all Microsoft Teredo Tunneling Adapters (e.g. Microsoft Teredo Tunneling Adapter #2 or #3 or #4, etc.)
3. Re-install Microsoft Teredo Tunneling Adapter by following the steps from this tutorial: How to install Microsoft Teredo Tunneling Adapter
4. If after re-installing teredo tunneling, you still have problems then proceed to Step 3.

Step 3. Enable Teredo Client using NETSH command

1. Right click at Command Prompt and select Run as Administrator.
2. At command prompt window type the following commands in this order and press Enter after typing each one of them.

netsh

int teredo

set state disabled

int ipv6

set teredo client

3. Close command prompt.

4. Open Device manager.

5. Select View > Show Hidden Devices. The Teredo Tunneling Pseudo Interface reappears and should be working without problems now.

Method 2 (not work in Windows 10 Home):

Open Group Policy Editor by running gpedit.msc command. Under Computer Configuration in the tree view, expand Administrative Templates then click All Settings. Look for "Set Teredo State", then double-click that. You will then enable the
policy and set the state below to "Enterprise Client" from what it was before in the dropdown menu under "Select from the following states".

Hope this helps!

References:

1. https://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/how-to-install-teredo-tunneling-pseudo-interface/62790531-c342-4c5b-b367-542784ae768f

2. Teredo Tunneling Adapter Is Missing

 

missing/mancante Microsoft Teredo Tunnel Adapter

Hello,

With regards to your concern about installing a missing Teredo tunnel adapter driver, we recommend following the solution provided by
Ashish Sondhi on this link. The thread
is posted last 2015, the issue is posted for Windows 7. However, this is also same steps with Windows 10.

If you need additional assistance, please let us know.

 

Teredo Tunneling Adapter Is Missing

The Teredo Tunneling Adapter is missing from my PC. I have tried to find it in device manager and it is not there. I did select show hidden devices but it still does not show up. I than tried to install it from the device manager via add legacy hardware,
but it does not show up in the list under the Microsoft section. I have tried wiping my computer and reinstalling windows and that still did not fix it. When I run command prompt and type

'netsh interface Teredo show state' it shows that it is disabled but even when I run 'netsh interface Teredo set state type=default' than run

'netsh interface Teredo show state' it still shows that it is disabled. I'm out of ideas and cant find anything else on this subject to try. Any help would be much appreciated. Thanks in advance.