Windows 10: The IO operation at logical block address 0x0 for Disk 2 PDO name: \Device\000000c8 failed...

Hello, up until a few weeks ago my email and Seagate external hard drive were working well.

I figured out the problem with email after hours, but I cannot figure out how to get my hard drive back. It actually shows the device, but it's no longer connected to a drive letter, which it always did automatically.


I cannot express how frustrated I am that I have some sort of issue EVERY time an update is performed with Windows 10.


I have 2 Seagate hard drives, one shows up fine and the other disappeared from Explorer. Any advice would be helpful. This is the error that I found.

The IO operation at logical block address 0x0 for Disk 2 PDO name: \Device\000000c8 failed due to a hardware error.

:)

 

The IO operation at logical block address 0x3acad0 for Disk 0 (PDO name: \Device\0000003c) was retried.

my computer system disk is a SSD, and I buy it a few days. I want to know what is mean about the error:

The IO operation at logical block address 0x3acad0 for Disk 0 (PDO name: \Device\0000003c) was retried.

 

Garbled and illegible BSODs

Diagnostics Test [/i] HDD TEST


Note Run the tests on all hard drives/partitions!

Please run HDTune first, in the order posted!
*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

*Arrow Run SeaTools DOS to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run the long test.


Note Do not run SeaTools on an SSD as the results will be invalid.
Make a photo of the result and post it.

*Arrow Run chkdsk
Disk Check - Windows 7 Help Forums
Use option TWO with parameter /r
Upload the chkdsk log *Arrow Check Disk (chkdsk) - Read Event Viewer Log - Windows 7 Help Forums

Code:

 

ever since moving to windows 10 I get The IO operation and logical block address error

This error is all over my event logs

The IO operation at logical block address 0x325d6d640 for Disk 2 (PDO name: \Device\00000054) was retried.

The IO operation at logical block address 0x322e90458 for Disk 2 (PDO name: \Device\00000054) was retried.

The system failed to flush data to the transaction log. Corruption may occur in VolumeId: M:, DeviceName: \Device\HarddiskVolume2.

(The I/O device reported an I/O error.)
The IO operation at logical block address 0x5f1790 for Disk 2 (PDO name: \Device\00000054) was retried.

this only hass occured under windows 10.

prior to upgrading to windows 10 edu. I was runing windows 7 ent and never had any errors like this

I have recently(last week) did a clean install of windows 10 ENT LTSB. and the errors are still there

this drive is pointing to an array on my areca arc 1261 ML controller, the logging for the controller shows no errors for itslef or the cache module, nor does the smart information for all of the drives in the array

the volume is 16x2tb drives in raid 6