Windows 10: Touchpad on surface pro 7+ is freezing

I have a surface pro 7 + tablet which is working fine, but quite frequently the touchpad freezes. I tried uninstalling the drivers but it did not help. I also tried with Microsoft Diagnostics Toolkit and with Intel Graphics command Center but nothing did work. The touchpad is freezing if the tablet is plugged in the power supply or not. We have 5 or 6 Surface Pro 7 and 7 + at the company but only one has this issue. I also made a clean reset of the system but that also did not work. Is there anything else I can try?

:)

 

surface pro 4 touchpad not working

Hi Mehrnaz,

Based on the description, it seems that you have done all the necessary troubleshooting steps to fix the issue with the touchpad. You may also check this

link for additional troubleshooting steps. If the issue persists, we suggest that you get in touch with the device manufacturer's website to have the most updated version of the driver.

Feel free to get back to us if you need further assistance.

 

Surface Pro 4 - Crashes / Freezes

Hi Edward,

Thank you for posting your query on Microsoft Community.



I understand your concern and will guide you in the right direction.

The main causes observed so far are driver issues, so I suggest you to install and update all the drivers and see if it helps.

Download drivers and firmware for Surface

I would also suggest you to install all Windows update and check.

Follow the steps:

1. On the search bar type “Settings”.

2. Click on “Update and Security”.

3. Click on “Check for Updates”.

4. Read and accept the license terms, and then tap or click Finish if the update requires it.

Reference:

https://www.microsoft.com/surface/e...ce-pro-4?category=performance-and-maintenance

Hope this information helps. Please let me know if you need further assistance.

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?