Windows 10: Trying to map a network drive on my Surface Pro 6

We are a 2 person office with a NAS for file sharing. We have moved our base home for the time being-we were accessing files via Splashtop at the office, but we decided since this will likely be a fairly long term situation, it was much more efficient to bring the NAS home.

My issue is that both while it was still in the office, and now at home, I can't map the two drives I need to access client files. I get the same message whether trying in the office or at home:


The mapped network drive could not be created because the following error has occurred:

The specified server cannot perform the requested operation.


I have mapped drives on the desktop computer in the office, so I do know what I'm doing, but this has me at a standstill since I can't get to my files. We were able to get my husband's Surface Studio and his Surface Pro 7 both connected, so I know it can be done.

:)

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?

 

New Surface Pro 5 and Surface Pro 6 firmware for Windows 10 - Aug. 29 Surface

Source:

• https://support.microsoft.com/en-us/...update-history
• https://support.microsoft.com/en-us/...update-history

 

New Surface Pro 6 Drivers Update for Windows 10 - Nov. 15

Source: https://support.microsoft.com/en-us/...update-history