Windows 10: Trying to relstall Old program, but it advises that the specified modules could not be found.

Discus and support Trying to relstall Old program, but it advises that the specified modules could not be found. in Windows 10 Drivers and Hardware to solve the problem; C:\qwapp.dll and C:\ qwinver.dll are not loading when I try to reinstall Quicken XG 2004. I have been using this program successfully until I had a... Discussion in 'Windows 10 Drivers and Hardware' started by MichaelDouglas0810, Feb 13, 2020 at 10:27 AM.

  1. Trying to relstall Old program, but it advises that the specified modules could not be found.


    C:\qwapp.dll and C:\ qwinver.dll are not loading when I try to reinstall Quicken XG 2004.

    I have been using this program successfully until I had a hard disk fail, and I am trying to reinstall this program.

    I am able to download and it shows up on my list of programs, but it will not successfully run without these to modules.

    I am running Windows 10 64Bit with the latest upgrade, using a new SSD drive, whereas I was using a 1TB HDD.

    Can you please advise?

    :)
     
    MichaelDouglas0810, Feb 13, 2020 at 10:27 AM
    #1

  2. Specified module could not be found

    Hello Stephen,

    Thank you for keeping us posted.

    As per the description, I understand that you are experiencing issue with error message: “Specific module cannot be found” on the system.

    I certainly understand your concern and will try my best to help you.

    I really appreciate all your efforts in trying to fix the issue.

    I would suggest you to refer to the suggestions provided in the following Microsoft link given below and check if that helps.

    \System\SysMenu.dll The specified module could not be found

    The above steps holds good for Windows 10 as well.

    I hope this information is helpful.

    Please do let us know if you need any further assistance, we will be glad to assist you.

    Thank you.

    Jayant

     
  3. IC64.DLL SPECIFIED MODULE COULD NOT BE FOUND

    Hi Dhruv,

    I am vanshita.

    “The specified module could not be found” error usually shows on Windows startup and warm up, but it may also pop up when working with various programs or trying to connect to the Internet. Just like the majority of Windows errors,[1] this one might be caused
    by a bunch of reasons, starting from virus attack[2] and finishing with corrupted system files.

    The most common issues that trigger “The specified module could not be found” alert are:

     missing or corrupted DLL files;

     damaged Windows registry entries;

     incorrect installation of programs;

     outdated Windows drivers;

     malware attack.

    To fix “The specified module could not be found” error, you'll have to analyze the background of the error and isolate its culprit. Usually, the alert provides quite explicit information about the problem, so it's not difficult to understand which part of the
    system is malfunctioning:

    Normally, the error provides a full path to the DLL file[3] or program that was unable to start. Therefore, write this name down and follow the instructions provided below to fix the “The specified module could not be found” error completely.

    First of all, you should check if your computer is not infected with malware. You can do it by scanning the system with Reimage or another security software. If it's not the case and your computer is virus-free, you have to prepare for a quite challenging procedure.

    The first step requires identifying and memorizing the program that causes this error. Once it’s done, you can follow these steps and fix “The specified module could not be found” error:

    1. Click on Start and open type File Explorer Options.

    2. Click the File Explorer Options to open it.

    3. When in Folder Options, go to View tab.

    4. Under Hidden files and folders option, find and tick Show hidden files and folders.

    5. Then find and untick Hide protected operating system files (Recommended) option.

    6. Click OK.

    Now you have to reboot the computer to Safe Mode with Networking:

    1. Open Start and click the arrow next to the Shut Down Button (or Lock Button) and click Restart.

    2. Before Windows logo appears, you have to press and hold the F8 key as the computer restarts.

    3. Advanced Boot Options screen appears. Use the arrow keys to select Safe Mode with Networking option, and click Enter key.

    Log into your PC as an administrator. When in Safe Mode follow these steps:

    1. Open Windows Task Manager by pressing Ctrl+Alt+Delete (Ctrl+Shift+Esc) keys together.

    2. Go to Process tab.

    3. In the list of processes, find entries that are associated with “The specified module could not be found” error and click End task.

    The last steps include modifications in Windows registry. In order to avoid accidental damage to the Registry or deletion of wrong keys, you should backup registry. Once it’s done, follow these steps to fix “The specified module could not be found” error:

    1. Click Windows + R keys and type regedit in the Run box.

    2. Open Registry Editor.

    3. Find and delete these registry entries:

    Restart the computer

    If you have followed these instructions carefully and attentively, they should have helped to solve the problem that caused “The specified module could not be found” error message.

    Repair your Errors automatically

    ugetfix.com team is trying to do its best to help users find the best solutions for eliminating their errors. If you don't want to struggle with manual repair techniques, please use the automatic software. All recommended products have been tested and approved
    by our professionals. Tools that you can use to fix your error are listed bellow:

    Hope it will help you

    Thanks
     
    vanshitavanshita, Feb 13, 2020 at 10:30 AM
    #3
  4. Trying to relstall Old program, but it advises that the specified modules could not be found.

    RunDLL There was a problem starting C:\Program The specified module could not be found

    I am wanting to uninstall an old unused Simply Accounting program from a DELL XPS 12 running Windows 10.

    This message comes up:

    "RunDLL

    There was a problem starting C:\Program

    The specified module could not be found."
     
Thema:

Trying to relstall Old program, but it advises that the specified modules could not be found.

Loading...
  1. Trying to relstall Old program, but it advises that the specified modules could not be found. - Similar Threads - Trying relstall Old

  2. Entry in Control Panel refuses to uninstall: "The specified module could not be found"

    in Windows 10 Installation and Upgrade
    Entry in Control Panel refuses to uninstall: "The specified module could not be found": There is an entry ("USB Sound Blaster XD" from Creative Technology) in Control Panel that refuses to be uninstalled ("The specified module could not be found"). I remember that there is a manual way of uninstalling, but I cannot remember any details. Would someone please give...
  3. IC64.DLL SPECIFIED MODULE COULD NOT BE FOUND

    in Windows 10 Network and Sharing
    IC64.DLL SPECIFIED MODULE COULD NOT BE FOUND: [ATTACH] I'am facing this problem since two days whenever I'am doing multitasking. It interupts in my work. Please tell me a solution for this....
  4. 3d viewer the specified module could not be found (exception from HRESULT:0x8007007)

    in Windows 10 Software and Apps
    3d viewer the specified module could not be found (exception from HRESULT:0x8007007): Whenever I open the 3D viewer app I get this error: (The specified module could not be found. exception from HRESULT :0x8007007E) I should say that I tried to remove and reinstall the app using Windows Power Shell but it didn't solve the problem. Thanks in advance....
  5. There was a problem starting C:\windows\nzmmu.nzm The specified module could not be found.

    in Windows 10 Network and Sharing
    There was a problem starting C:\windows\nzmmu.nzm The specified module could not be found.: What is that file and why can't it be found? I looked in the windows folder and i didn't see that file so it is gone. What is going on? https://answers.microsoft.com/en-us/windows/forum/all/there-was-a-problem-starting-cwindowsnzmmunzm-the/25f65d6a-7382-477e-a221-7c3c6d7c2734"
  6. DLL load failed: The specified module could not be found.

    in Windows 10 BSOD Crashes and Debugging
    DLL load failed: The specified module could not be found.: When an application fails to load a DLL, Windows generates the following error: "DLL load failed: The specified module could not be found." The message would be so much more helpful if it named the DLL that could not be loaded....
  7. C:\Program The specified module could not be found

    in Windows 10 Installation and Upgrade
    C:\Program The specified module could not be found: I'am trying to delete a program but can not and this window appears to me. The program, I am trying to DesignBuilder. If i can delete the program, I will upload new version....
  8. Error Message on Thinkpad Windows 10: The Specified Module Could Not Be Found

    in Windows 10 BSOD Crashes and Debugging
    Error Message on Thinkpad Windows 10: The Specified Module Could Not Be Found: Hello, I have a Thinkpad X270 with WIndows 10 Pro. I did a factory reset yesterday where I cleaned out everything on the computer, including all files, documents, programs. Ever since then, again yesterday, a message pops up when I open my computer -- it never did before the...
  9. RunDLL There was a problem starting C:\Program The specified module could not be found

    in Windows 10 Customization
    RunDLL There was a problem starting C:\Program The specified module could not be found: I am wanting to uninstall an old unused Simply Accounting program from a DELL XPS 12 running Windows 10. This message comes up: "RunDLL There was a problem starting C:\Program The specified module could not be found."...
  10. RUNDLL - The specified Module could not be found for 2 files

    in Windows 10 Support
    RUNDLL - The specified Module could not be found for 2 files: I'm getting two messages on startup from RunDLL. There was a problem starting c:|Users|Bob|AppData|Local|Experience Virtual|{hashChar}|hzdm.dll and the same for ExperienceVirtual.dll How can I stop these startup messages or fix the issue. Cannot find anything on those files...