Windows 10: Two OS drives ? For what ?

https://preview.redd.it/ct0nl2b253p...bp&s=593cabdc6c20455733e5fb87895452af6d724b69

Hello Reddit, I'm a bit confused as to why I have OS(C) and OS(D). Windows 10 is installed once only in OS(C) SSD, upon checking defragment menu. However, I still find stuff like Program Files and Program Files (x86) in OS(D), as shown in the above screenshot. Its taking up space which I would like to use for something else.



Therefore, I'd like to know why it exists and how to get rid of it if it's no use to me.

submitted by /u/Viukus_Kakuja
[link] [comments]

:)

 

Hard drive/ OS issue

a guy suggested :

• shutdown
• unhooked HDD
• restarted
• yay !!
• reconnected HDD
• restarted
• yay !!

also , try method 3
How do I unlock the drive where Windows 10 is installed?

 

DVD Drive issues.

The games used to run, now apparently the disks don't even read.

Go to Device Manager and remove the DVD
Scan for hardware changes and update driver as OS suggests

Still not working?

1) Clean the heads.
2) Run a diagnostic program on the drive.

Nothing else has changed about your system aside from the OS?

Revert to XP Home, assuming you don't find the source of the problem in steps above.

 

How to Partiton a Hard Drive in Vista

This is a way to get Vista to see another hard drive that is not associated with the OS. There is some times when your new hdd doesn't seem to want to work well with Vista. But, there is a solution in it.

Open the Computer Management By doing these steps.

• Click on the Start Button
• Click on Control Panel
• Click Administrative Tools
• Double click on Computer Management

You are now in the Navigation panel of the Computer Management.
When in Computer Management, you then have to allow the new drive to be recognized.

• Double click on Storage
• Double click on Disk Management

Now in the middle of your screen there is the layout of the Disk Drives that you have. The drives that are partitioned will show by the drive lettering. The others will just show up as having nothing at all in them. Below that there will be the Disk drives that are installed into the computer. You'll see that the primary one will all ways read as "Disk 0". Then you will have Disk 1 and so on. Under the Disks there will also see your CD-Rom drives.. If there is more then one, it will be labeled the same as Disk drives..

On to the Partitioning of the drive in question.

• Right Click on the drive
• Click to format the drive or Enable Volume. There will be a series of windows that open up. This is Vista's formatting. Just go threw the windows, and make sure everything is the way you want it to happen.
• Once the formatting is done, will take some time depending on the drive size.
• Right click on the drive
• Click on Mark the Partition as Active

After you have done those steps, The drive will be up and running threw Vista.



:Side Notes:
If you are not the Administer to the Os, then you will have to enable it..
You may also want to redo the drive lettering of it all. But, I really don't see a reason to do so. If you do, you have to redo drive paths and so forth.. A lot of work on something so small...