Windows 10: update 4/4. what do we do now?

submitted by /u/Cody_hoff713
[link] [comments]

:)

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?

 

Windows 10 Samsung Note 4 USB connection

Hi Terrence,

To help you out with your concern, here are some information that we need to know:

• Can you tell us what model of computer you are using while connecting to your Samsung Note 4?

However, we suggest you to run the Hardware and Device Troubleshooter through these steps:

• Press Win + X then select Control Panel.
• Click Troubleshooting.
• Click Hardware and Sound then select Hardware and Devices.
• To run the troubleshooter, follow the steps from the wizard.

You may also try updating the driver by following the steps on this
link.

Let us know if you need further help.

Thanks.

 

Desktop Split in 4

Hi,

To help you with your concern regarding your laptop screen, let me suggest you to update the graphic driver of your computer. Go to
Device Manager > Display adapters > Right-click the graphics driver >
Properties > Driver tab > Update driver and see if the issue persist.

You can also try to run your computer to Safe Mode. Please follow the steps below:

• Restart you computer
• After reaching sign-in screen, press and hold Shift key +
  Power button then Restart
• After restarting your computer to Choose an option, click
  Troubleshoot > Advanced options > Startup settings >
  Restart
• After the restart, there will be a list of options. Select 4 or press
  F4 to start your computer in Safe Mode

If the issue persist after the steps above, there's a possibility that your computer is experiencing LCD problems. We highly suggest you contact the manufacturer of your computer. Please see the steps below:

• The name of the OEM + “contact information”
• The name of the OEM + “PC support”

Please let us know how it goes for us to assist you further.