Windows 10: Update error: minimum battery on a laptop with dead battery

Recently, onde of the updates failed error 0x8024004c, and the messege says that I need to have my battery charged at least 40%.

Unfortunately, my PC's battery is dead, it doesn't charge anymore, and it only works while pluged.


Is there any solution to make it update even with the battery at 0%?

:)

 

laptop battery wont charge after latest update

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s okay if you only have 1).

7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.

 

Laptop battery Dead ?

Iv just been using my laptop for the past half an hour On the battery when for Some reason it cut off I knew i diddn't have much battery life left but it just Cut out instantly no warning message battery Low Etc...

Anyway i still needed to use the laptop so i went and plugged it in, laptop Said it was charging was on the computer about another half an hour after that then my dad walked in so i went to unplug the laptop to show him something on the net and as soon as i unplugged it the laptop cut out.

So i plugged it back in and noticed there was no amber charging light on the laptop so i started up the laptop and it displays on the battery icon "33% plugged in but not charging" and everytime i take it out the mains the laptop cuts out.

Is my battery dead or could it be just a fault with windows do you think ?

 

Battery Won't Charge Fully

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.