Windows 10: Update KB4579311 failing to install - help interpreting CBS log

KB4579311 has repeatedly failed to install on my PC running Windows 10 2004.

I get the error 0x800f0922

I have tried common troubleshooting steps like clearing the SoftwareDistribution folder, SFC, DISM restorehealth etc. - nothing has helped.

I have seen others upload a CBS log file set, so I have uploaded mine here:

https://1drv.ms/u/s!AozciX1DScfihNI1Vey26dXTcMRZYA?e=Jtcy4o

I've read through the log, but I can't see any obvious issue.

submitted by /u/daveoc64
[link] [comments]

:)

 

Password not accepted after KB4579311 update installed

Hi

RE: Password not accepted after KB4579311 update

Computer HP

ED: Win 10 Home

Ver: 2004 x64

Installed: 19.06.20.

OS Build: 19041.450

Password not accepted after KB4579311 update, having tried the following basics six times:-

Double checked correct PW

Entered PW with Virtual screen keyboard

Check Virtual keyboard was UK setting

Changing PW in safe internet mode

PW reset using USB

All my above attempts failed while using KB4579311 update.

Returned system to previous operating system prior to KB4579311 update computer accepts my PW and works all OK. Have paused win 10 updates for one month as it appears KB4579311 update is causing the issue.

Having read previous MRDBeta work around reply post.

KB4579311 is sitting in my Local Disk, Windows, SoftwareDistribution, Download folder. Is it worth me deleting KB4579311 and try to install the patches or through Windows 10
updates again?

OR

Wait for a confirmed work around or update from MS as I need my computer for work and I'm not a computer expert?

Regards

Sam

 

Windows Updates failed to instal

I just did step one and they have just all installed.... thank you so much.... it was quite frustrating having that update window pop up every 5 minutes and failing to instal every time

Thanks mate

 

Windows Updates failed to instal

I'm not sure how differant XP media center Edition is but you could clear the history \ cache if these folders are there.

Step 1 Register DLL files.

=================

By trying this step, we can check if the update engines are working properly.



1. Close all instances of Internet Explorer.

2. Click Start and Run, type "Regsvr32 atl.dll" (without quotes) in the Open box and click OK.



Note: There is a space between regsvr32 and atl.dll



3. Similarly, one by one, register the files listed below:



Regsvr32 msxml3.dll

Regsvr32 wuapi.dll

Regsvr32 wuaueng.dll

Regsvr32 wuaueng1.dll

Regsvr32 wups2.dll

Regsvr32 wucltui.dll

Regsvr32 wups.dll

Regsvr32 wuweb.dll

Regsvr32 qmgr.dll

Regsvr32 qmgrprxy.dll

Regsvr32 jscript.dll



Note: If you encounter errors while registering any of these files then skip that file and continue with the next one.



If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.



Step 2 Verify the relevant Windows Update services.

=========================================

1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

2. Double click the service "Automatic Updates".

3. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

4. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

5. Click on the tab "General "; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the button "Stop" under "Service Status" to stop the service.

6. Then please click the button "Start" under "Service Status" to start the service.

7. Please repeat the above steps with the other services:



Background Intelligent Transfer Service

Event Log

Remote Procedure Call (RPC)



Note: Event log service is enabled on all of the hardware profiles; this service does not have an option to enable or disable on certain hardware profile.



If it still does not help, let's proceed to step 3.



Step 3 Reload the Update temporary folders.

===================================

One possible cause is that the temporary folder for Windows Update is containing corrupted files. Let's erase all the files there to get the system clean.



1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net stop WuAuServ



2. Click Start, Run, type: %windir% and press Enter.

3. In the opened folder, rename the folder SoftwareDistribution to Sdold.

4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net start WuAuServ



Please test the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, please assist me in collecting the following information.