Windows 10: update

I have spent over 8 h trying to update..ran update troubleshooter, then twice shown below

How the F do I get my zbook14 to install

Feature update to Windows 10, version 1903

without the 0xc1900101

pissing me off...don't want to do clean install Had to do that with my HP workstatation

am really annoyed with this ****


Method 1: Run SFC Scan.


To run an SFC scan, follow these steps:

1. 
   Run Command Prompt as Administrator.
   
   
2. 
   Type sfc /scannow and hit Enter.
   

This will check and run an auto-repair on the issue.



Method 2: Run DISM Tool.


After running the SFC scan and the issue still persist, run the DISM to check the system health and to try restoring the files. To run DISM tool, follow these steps:

1. 
   Run Command Prompt as Administrator.
   
   
2. 
   Type the following commands:
   
   1. 
      DISM.exe /Online /Cleanup-image /scanhealth
      
      
   2. 
      DISM.exe /Online /Cleanup-image /Restorehealth
      

NOTE: This might a while to finish scanning. Do not cancel.



Method 3:


After doing Method 1 and Method 2 but the issue still persist, you can manually reset the Windows Update Components and Run Windows Update process again.


Resetting Windows Update Components will fix those corrupted Components and will help the Update installation quickly. To reset Windows Update Components, follow these steps:

1. 
   Run Command Prompt as Administrator
   
   
2. 
   Stop BITS, Cryptographic, MSI Installer and Windows Update Services. To do this, type the following commands:
   
   1. 
      Net stop wuauserv
      
      
   2. 
      Net stop cryptSvc
      
      
   3. 
      Net stop bits
      
      
   4. 
      Net stop msiserver
      
3. 
   Rename SoftwareDistribution and Catroot2 folder. To do this, type the following commands:
   
   1. 
      Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
      
      
   2. 
      Ren C:\Windows\System32\catroot2 Catroot2.old
      
4. 
   Restart BITS, Cryptographic, MSI Installer and Windows Update Services. To do this, type the following commands:
   
   1. 
      Net start wuauserv
      
      
   2. 
      Net start cryptSvc
      
      
   3. 
      Net start bits
      
      
   4. 
      Net start msiserver
      
      
   5. 
      Restart your computer and try to install Windows Updat
      
   
   

:)

 

Windows Updated(16299.309).KB4088776 Restart is required to complete.


Hi dalchina. Good news, I followed your suggestion and reinstalled the update and now it appears as "installed correctly" *Biggrin Maybe it was not necessary to run the Windows Update Troubleshooter or maybe if necessary. But using it I do not think it could have worsened something. The installation was very fast, unlike the first time it showed step 1 and step 2 completed.

Thanks for the suggestions and for the time to respond Best regards.


And thanks for the tip of that program, I'll have it on my list.

 

Intel E5200 Gets Updated, R0 Stepping Coming Up

Intel's Pentium Dual-Core E5200 processor is getting on course for a specifications update. The chip will feature in a new, improved Wolfdale-2M core, spec'd out as the R0 stepping, from its current M0 stepping. The new stepping is intended to add new instructions, power-management features, and bring about changes in the chip-package. A short list of known changes is as follows:

• CPUID changed from 10677 to 1067A
• Power State Indicator (PSI) support with Intel 4 series chipsets
• New instructions - XSAVE and XRSTOR
• New S-spec and MM numbers
• New halide-free chip package

Due to the changed CPUID, users may require BIOS updates to detect the CPU. According to the company, E5200 R0 should be out by April 13.

Source: TechConnect Magazine

 

Intel Gives Core i3 and Core i5 Dual-Core Processors K0 Stepping Update

Intel is giving some existing 32 nm "Clarkdale" based Core i3 and Core i5 processors an update. The processors will transition to the new K0 stepping from the existing C2 stepping. The parts that will be made on the K0 silicon are Core i3 models 530 (new sSPEC: SLBX7), 540 (new sSPEC: SLBTD) and Core i5 models 650 (new sSPEC: SLBTJ), 660/661 (SLBTK/SLBTB), 670 (SLBTL). Newer and upcoming models such as the i3-550, i3-560, i5-665K, and i5-680 are already being built on the K0 stepping die. Motherboards will require a BIOS update to support the new K0 stepping processors.

The K0 stepping change includes the following highlights:

• New S-spec and MM numbers for the converting products
• Extended CPUID will change from 0x00020652 to 0x00020655
• Host RevID will change from 0x12 to 0x18
• K0 stepping package is pin compatible with C2 stepping package
• Adds Processor Context ID (PCID) support

The revised older SKUs that are built on K0 stepping will be market-available by October 16.