Windows 10: Upgrade from Windows 7 Home to Windows 10 error message 0x8007001F-0x2006 installation...

Discus and support Upgrade from Windows 7 Home to Windows 10 error message 0x8007001F-0x2006 installation... in Windows 10 Installation and Upgrade to solve the problem; The diagnostics says to go to https://microsoft.com/fwlink/?LinkID=528892 The laptop is Acer Aspire 7741 running on Windows 7 Home Premium... Discussion in 'Windows 10 Installation and Upgrade' started by AdministratorTakeuchi, May 21, 2020.

  1. Upgrade from Windows 7 Home to Windows 10 error message 0x8007001F-0x2006 installation...


    The diagnostics says to go to https://microsoft.com/fwlink/?LinkID=528892

    The laptop is Acer Aspire 7741 running on Windows 7 Home Premium

    :)
     
    AdministratorTakeuchi, May 21, 2020
    #1
  2. vJaCkHz Win User

    Unable to upgrade from 1803 to 1903 - Error 0x8007001F - 0x2006

    Hi dalchina,

    Sorry for the slow response, i've been without internet for a while! I have tried doing an in-place upgrade as you suggested below, but I am still met with the same error when trying to install it. See below:


    Upgrade from Windows 7 Home to Windows 10 error message 0x8007001F-0x2006 installation... [​IMG]


    I think i'm going to try messaging JakeWell and see if he can help me attempt the technical route.

    Thanks again.
     
    vJaCkHz, May 21, 2020
    #2
  3. vJaCkHz Win User
    Unable to upgrade from 1803 to 1903 - Error 0x8007001F - 0x2006

    Hi All,

    This is my first time posting on here, so apologies I have missed some information....

    For the past couple of months my computer has been stuck on windows 10 Ver 1803 (Build 17134.706), and each time I have tried to update it, I am met with the following error message: "A current driver on your PC may be better than the driver we're trying to install. We'll keep trying to install."

    It appears I have an almost identical problem to the one in this thread:
    Can't Upgrade, Error 0x8007001F - 0x2006 and more, Stuck on 1709

    I'm even met with the same update error once the update tries to install:
    "The installation failed in the SAFE_OS phase with an error during REPLICATE_OC operation.

    I have tried pretty much everything JakeWell tried in his post, but to no avail. However, later on in the post, he did manage to find the cause of his problem, and I believe I have the same issue. Many of the subkeys in the "Component Based Servicing" registry tree are either empty or completely missing. See below:


    Upgrade from Windows 7 Home to Windows 10 error message 0x8007001F-0x2006 installation... [​IMG]


    I have tried downloading an iso with the same version as my Win10 build and mounting the wim file using dism, and then exporting the missing subkeys, but when I try to import/merge them with my registry, I get the following error:


    Upgrade from Windows 7 Home to Windows 10 error message 0x8007001F-0x2006 installation... [​IMG]


    Any help with solving this issue would be much appreciated! Upgrade from Windows 7 Home to Windows 10 error message 0x8007001F-0x2006 installation... :)
     
    vJaCkHz, May 21, 2020
    #3
  4. topgundcp Win User

    Upgrade from Windows 7 Home to Windows 10 error message 0x8007001F-0x2006 installation...

    Upgrade Windows 7 to 10 Error 0x8007001f

    Upgrade from Windows 7 Home to Windows 10 error message 0x8007001F-0x2006 installation... [​IMG]

    The partition layout of disk 0 (shown as disk 1 in Partition Manager) is non standard and was customized by the manufacturer. A normal Win 7 installation will have a layout:
    1. 100MB System Reserved, NTFS format and marked as Active
    2. C drive.
    A normal Windows 10 installation will have:
    1. 550MB Reserved partition, NTFS format and marked as Active
    2. C drive.
    Since you know how to use Minitool Partition Manager. Suggest to use it:
    1. Create a bootable installation USB from the Windows ISO using: Rufus - Create bootable USB drives the easy way
    2. Delete the 1st 2 partitions (102MB, 15GB) then create a 550MB partition, format as NTFS, label "System Reserved", assign a letter R, mark as Active
    3. Move C drive next to the newly created 550MB. should look like the screen shot below, note H: drive should be C: in your case:

      Upgrade from Windows 7 Home to Windows 10 error message 0x8007001F-0x2006 installation... [​IMG]
    4. Boot up the USB created in step 1, on the first screen, press SHIFT+F10 to open the Admin command prompt then type:
      bcdboot C:\Windows /s R: /f BIOS =====> This will create the BCD to boot Windows and store in R: (550MB partition)
    5. Reboot the PC then try to upgrade again
    NOTE: It is advisable to create a backup image of the whole disk 0, just in case anything goes wrong then you can restore back before making any modification.
    To create a backup image Use:
    Macrium Reflect Free Edition x64
    Macrium Reflect Free Edition x86
     
    topgundcp, May 21, 2020
    #4
Thema:

Upgrade from Windows 7 Home to Windows 10 error message 0x8007001F-0x2006 installation...

Loading...
  1. Upgrade from Windows 7 Home to Windows 10 error message 0x8007001F-0x2006 installation... - Similar Threads - Upgrade Home error

  2. Unable to upgrade to Windows 10 - Getting 0x8007001F-0x2006 Error Message

    in Windows 10 Installation and Upgrade
    Unable to upgrade to Windows 10 - Getting 0x8007001F-0x2006 Error Message: I tried to upgrade to Windows 10 some time ago, but had to back off due to problems caused so am still on Windows 7 Pro. I have seen on CNET that it was possible to still upgrade free to Windows 10 so went to the Microsoft Download Windows 10 site at...
  3. Error: 0x8007001f – 0x20006, unable to upgrade from Windows 7 to Windows 10

    in Windows 10 Installation and Upgrade
    Error: 0x8007001f – 0x20006, unable to upgrade from Windows 7 to Windows 10: Hello, Since W7home x64 is not supported anymore, i'm trying to upgrade it to W10, but it fails constantly. I did use the media creation tool and the upgrading process did go well until W10 is fully downloaded, it restarts for the 1st time and starts the install...
  4. Windows 7 upgrade to 10 error 0x8007001F - 0x3000D

    in Windows 10 Installation and Upgrade
    Windows 7 upgrade to 10 error 0x8007001F - 0x3000D: Repeatedly getting this same error, and rollback to Windows 7. Any help most appreciated! SetupDiag, Disk Management, Minitool Partition Wizard files here. Log-collector gave an error--screencap attached. No non-Microsoft antivirus installed. One other wrinkle: my...
  5. Error: We couldn't install Windows 10 Ox8007001F - 0x2006 The installation failed in the...

    in Windows 10 Installation and Upgrade
    Error: We couldn't install Windows 10 Ox8007001F - 0x2006 The installation failed in the...: To begin with I am a true neophyte when it comes to computers. When my download is almost through I get a message, "We couldn't install Windows 10 Ox8007001F - 0x2006 The installation failed in the SAFE_OS with an error during REPLICATE_OC operation" Can someone tell me...
  6. Unable to upgrade from 1803 to 1903 - Error 0x8007001F - 0x2006

    in Windows 10 Installation and Upgrade
    Unable to upgrade from 1803 to 1903 - Error 0x8007001F - 0x2006: Hi All, This is my first time posting on here, so apologies I have missed some information.... For the past couple of months my computer has been stuck on windows 10 Ver 1803 (Build 17134.706), and each time I have tried to update it, I am met with the following error...
  7. Can't Upgrade, Error 0x8007001F - 0x2006 and more, Stuck on 1709

    in Windows 10 Installation and Upgrade
    Can't Upgrade, Error 0x8007001F - 0x2006 and more, Stuck on 1709: Hello, for the past year my brother's computer has been stuck on Windows 10 Ver. 1709 (Build 16299.371) and I haven't paid much attention to the issue until recently this month. I've been trying to upgrade to 1803/1809 but been unable to due to Windows Update failing with...
  8. Win 7 to 10 0x8007001F upgrade error

    in Windows 10 Installation and Upgrade
    Win 7 to 10 0x8007001F upgrade error: I have user that I've attempted to upgrade to Windows 10 but it failed with error0x8007001F. To date, I've upgraded at least 200 machines and counting using the same steps and haven't had a problem. All of them are Dell Optiplex models that support Windows 10. Steps I've...
  9. Unable to upgrade to Windows 10 from Windows 7. Error: 0x8007001F - 0x20006

    in Windows 10 Installation and Upgrade
    Unable to upgrade to Windows 10 from Windows 7. Error: 0x8007001F - 0x20006: I'm trying to update my windows 7 machine to windows 10, using the installation guide here : https://www.microsoft.com/en-us/software-download/windows10 I'm updating to 7 to 10 while keeping my programs/files. As I update it downloads okay, and installs. Then when it...
  10. Upgrade Windows 7 to 10 Error 0x8007001f

    in Windows 10 Installation and Upgrade
    Upgrade Windows 7 to 10 Error 0x8007001f: Hi Folks I've been trying to upgrade from Windows 7 to Windows 10 for the last 2 weeks but to no avail. I will summarise below what I have tried to date. I purchased a Windows 10 Pro licence for this. I have tried to follow all of the various tips out there but I'm...
Tags: