Windows 10: Upgraded my PC, now having system instability every so often

I recently upgraded my PCs CPU, motherboard and RAM and since doing so I have had a number of instability issues, my games will crash at random times and sometimes my PC crashes, I've tried to enable and disable the OC genie in the BIOS but I haven't noticed any difference, I also noticed when I first installed the parts in the bios my ram was set to 2333MHz I don't know if this is useful information or not, I had to manually set it to 3000MHz which is what it is out of the box

Just wondering if anyone is able to help me, my system logs are linked blow along with specs, thank-you for taking the time to read.



https://1drv.ms/u/s!Al4k10BNkHaGjnErk7RKKY3kpJZw?e=bT0mZl



i5 9600kf

16gb DDR4 @3000MHz

MSI z390 a-pro

gtx 1070

Corsair 500M PSU

:)

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

PC Build Steps

1.1 - Ideally put optical in SATA 0, and SSD in SATA 1, this will cause the optical drive to be the default 1st boot option. You can change it manually if not, but I like it this way
2.infinity - yes, that's fine. if it's above 70 +/- 5 degrees, then it may just need a repaste/remount

 

Programs not working


In post 26 there were steps listed to fix the operating system corruption.
Are you able to follow them?
In post 29 was the suggested dism repair command.