Windows 10: USB-Bootstick

I will start from the Beginning. So I did a little research and after that I had to go to work and let my Laptop shut down but it started to install some Updates. Later when I got home, I booted my Laptop and it showed me: "Preparing Automatic Repair" Most likely because it shutted off during installation no power and data got corrupted or uncompatible driver/s. Then: "Diagnosing your PC" and at last Blue Screen.


Here is what I did:

• Start Help = Fail log file: C:\WINDOWS\System32\Logfiles\Srt\SrtTrail.txt
• Start Setting

1. 4 = Fail
2. 6 = Fail
3. 7 = Fail
4. 8 = Fail

• Uninstall Updates

1. Uninstall Current Quality Update = A Problem has occured
2. Uninstall Current Function Update = Due to a problem, you cannot uninstall the last Windows function update. Instead, try resetting your PC Troubleshoot > Reset this PC

• System Restore = 2 Restorations Points both failed
• System Image Recovery = No Image found
• Reset this PC

1. Cloud-Download with and without LAN-cable = Problem resetting to original settings
2. Local Reinstallation = Problem resetting to original settings

• Command Prompt

1. sfc /verifonly = Windows ressource protection has found integrity violations. For online repairs, details can be found in the CBS log file under windir\Logs\CBS\CBS.log. Example C:\Windows\Logs\CBS\CBS.log. For offline repairs, see the log file identified by the /OFFLOGFILE flag for details
2. sfc /scannow = Windows Ressource Protection could not perform the requested operation.
3. dir d: > chkdsk d: and d: /f = Volume cannot be opened for direct access operation.
4. bootrec /fixmbr = The process has been completed
5. bootrec /fixbooot = Access denied
6. bootrec /scanos = Total number of identified Windows installations: 0
7. bootrec /rebuildbcd = the same as /scanos

• I created an USB-Bootstick with the Media-Creation-Tool both Versions 64-bit and 32-bit
• Booted via UEFI

1. 64-bit = Loading Files and right after that a black screen and nothing happens
2. 32-bit = Loading Files and after that Windows failed to start

File: \windows\system32\boot\winload.efi

Status: 0xc0000359

Info: The application or operating system couldn't be loaded because a required file is missing or contains errors.

• New hard drive Hitach

1. 64-bit = same problem
2. 32-bit = same problem

Can someone help me?


btw I have a ASUS Model R541N with Intel Pentuim

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

USB boot for bios update

Did the first step. It already doesn't work. Note the capacities and drive letters M:/N: The HP utility is about to format my raid-1 volume containing my 2 750gb drives. It thinks it's the usb stick. I can not select any other drives in the HP utility. My 512mb usb stick is U:.

Any other suggestions?

 

Windows 10 infinite restart black screen

Thank you john for all of your help i decided to get the usb my computer came with and factory reset it i didnt have anything that personal or valueable so its ok thanks for the help though i appreciate it