Windows 10: USB Bugs

Hi, i just recently bought a new headset with usb connector and pc doesnt detect it.

And sometimes if there are alot of usb ports on use they stop workin like , cam freezing or devices just stop working , and if i swap from usb ports they work again.

I have windows 10 64b

submitted by /u/katwenty
[link] [comments]

:)

 

Windows 10 USB Device Initialization Bug?

Hi,



Have you updated the drivers for all the devices?



I would suggest you to disable and re-enable the USB controllers. The following steps will uninstall all the USB controllers and then re-install them:

• Right click on Start, and then click Run.
  
• Type “devmgmt.msc” without quotes, and then click
  OK. Device Manager opens.
• Expand Universal Serial Bus controllers.
  
  Note: You might have to scroll down the list to find this item.
  
• Right click the first USB controller under Universal Serial Bus controllers, and then click
  Uninstall to remove it.
• Repeat step 4 for each USB controller that is listed under
  Universal Serial Bus controllers.

Note: Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.



Hope it helps. If you have any further issues on the computer, please post your question related to Windows and we will be happy to help you.

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

USB boot for bios update

Did the first step. It already doesn't work. Note the capacities and drive letters M:/N: The HP utility is about to format my raid-1 volume containing my 2 750gb drives. It thinks it's the usb stick. I can not select any other drives in the HP utility. My 512mb usb stick is U:.

Any other suggestions?