Windows 10: usb device not recognised

Discus and support usb device not recognised in Windows 10 Drivers and Hardware to solve the problem; My usb memory stick has stopped working, I get the following message "Windows has stopped this device because it has reported problems. Code 43 A... Discussion in 'Windows 10 Drivers and Hardware' started by ChrisMount2, May 21, 2020.

  1. usb device not recognised


    My usb memory stick has stopped working, I get the following message


    "Windows has stopped this device because it has reported problems. Code 43


    A request for the USB device descriptor failed."


    Any ideas how I might recover the data from the device?

    :)
     
    ChrisMount2, May 21, 2020
    #1
  2. Kem Mon Win User

    USB wireless mouse 'USB device not recognised'

    Hi,

    There are a lot of possible reason why this issue has occurred. We have some
    questions for your to isolate this matter:


    • Have you tried using the USB mouse to other computer?

    • Is this happening with other devices?

    • What other troubleshooting steps have you done so far?

    We suggest that you perform these methods of troubleshooting steps and check if there's any changes:

    Method 1: Run the
    Hardware and Devices Troubleshooter.

    To run the
    Troubleshooter,
    follow these steps:


    • On the search bar, type
      Troubleshooting
      and hit
      Enter.

    • Choose
      Hardware and Sound.

    • Click on
      Hardware and Devices
      to run the troubleshooter

    Method 2: Update your drivers.

    To know how to update your drivers, click
    here.

    Method 3:
    Run SFC Scan.  

    To run an
    SFC scan, follow these steps:  


    • Run
      Command Prompt as Administrator.  

    • Type
      sfc /scannow
      and hit
      Enter.   

    Method 4:
    Run DISM Tool.  

    To run
    DISM Tool, follow these steps:


    • Run
      Command Prompt as Administrator.  

    • Type the following command:  

      • DISM.exe /Online /Cleanup-image /scanhealth  

      • DISM.exe /Online /Cleanup-image /Restorehealth  

    NOTE:
    This might take a while to finish scanning.
    Do not cancel. 

    Method 5: Clean Boot.

    To perform a
    Clean Boot, click
    here.

    Note:
    Reset the computer back to
    Normal Mode
    once you are done with the troubleshooting by following the section
    "How to reset the computer to start normally after clean boot troubleshooting"
    from the same article.

    If the issue persists, it is possible that the
    device itself has issues. We suggest that you
    contact the store
    from where you
    bought the device.

    Let us know how it goes.

    Regards
     
    Kem Mon, May 21, 2020
    #2
  3. ItWit Win User
    USB Devices not recognised.

    I have two devices that regularly are not properly recognized by Windows 10 one is a Garmin GPS and the other is a DJI Phantom Drone. In the case of the Garmin the USB Drives are recognised by Windows (Confirmed using USBDEVIEW) but the software does
    not recognise the device and continues to search for it.

    In the DJI case it seems to recognise the device but the software cannot access the Drone information i.e. Version Numbers etc. It also often reports errors on the SD Card inserted into the Drone but no errors are reported if the SD Card is inserted into
    a card reader.

    Any suggestions that I can try would be appreciated.
     
    ItWit, May 21, 2020
    #3
  4. usb device not recognised

    USB device not recognized spam

    Hi Kyle,

    You may receive this error if one of your USB connected devices is not properly recognized by the system. Let's try the troubleshooting steps provided by
    Krishna Prasobh V on this
    thread
    .

    In addition, we suggest that you turn off the notifications from the USB by following these steps:

    • Open Settings by typing "settings" in Cortana's search box.
    • Click on Devices.
    • Locate USB and toggle the switch to Off.
    Keep us updated with the status of your concern and we'll be glad to assist you further.
     
    Katrina Men, May 21, 2020
    #4
Thema:

usb device not recognised

Loading...
  1. usb device not recognised - Similar Threads - usb device recognised

  2. usb device not recognised

    in Windows 10 BSOD Crashes and Debugging
    usb device not recognised: hi my laptop keeps beeping and its telling me the last usb i plugged in malfunctioned and windows doesn't recognise it so i should try and plug it in again however i dont have the usb anymore....
  3. USB Device Not Recognised

    in Windows 10 Drivers and Hardware
    USB Device Not Recognised: [ATTACH] I keep getting this showing up when this USB works on other computers, just not the computer I need to use it on! the advice from 2015 of; Method 1: Run the Troubleshoot Hardware and Devices. Hardware troubleshooter reviews, diagnose and identifies operational...
  4. USB device not recognised keeps persisting

    in Windows 10 Drivers and Hardware
    USB device not recognised keeps persisting: Hi, I've looked everywhere on the internet and I can't find a working solution. I get the USB device not recognised popup with the usb connect/disconnect sound. At times it's once every few minutes, but other times it's every three seconds. In device manager it's listed as...
  5. USB Device Not Recognised

    in Windows 10 Drivers and Hardware
    USB Device Not Recognised: Hi, About a month ago, I received a notification on Windows that my "USB device is not recognised" immediately after my mouse stopped responding to my inputs. I tried unplugging and replugging the connector on the only USB device plugged in, my wireless mouse. It worked the...
  6. USB device not recognised

    in Windows 10 Drivers and Hardware
    USB device not recognised: 'The last USB device you connected to this computer malfunctioned and Windows does not recognise it' This has just started happening since the last Windows update. The Laptop is fully up to date with the manufacturer's software. Every 2-3 second the warning pops up and the...
  7. windows is not recognising a new usb device

    in Windows 10 Drivers and Hardware
    windows is not recognising a new usb device: I am trying to add a HDTV usb stick, but windows is not always recognising it https://answers.microsoft.com/en-us/windows/forum/all/windows-is-not-recognising-a-new-usb-device/cabfbdfb-8dd5-4ff8-bb9e-c0ebfd821a9f
  8. Device not recognised

    in Windows 10 Drivers and Hardware
    Device not recognised: I am trying to sync music to my Ipod - The device is not able to be added even though it is showing as being connected.. The odd thing is my Ipod is showing as being F drive and the music is appearing on the drive but when I eject my Ipod the music is nowhere to be seen....
  9. USB 3.0 not recognised in device manager

    in Windows 10 Drivers and Hardware
    USB 3.0 not recognised in device manager: My desktop has 4 USB 3.0 ports on it and when I turned my pc on this morning, none of them were working, they are not even transferring power to my phone when I plug it in. I started trying to troubleshoot but when I opened device manager, I noticed I was lacking any USB Root...
  10. Not recognising any USB devices

    in Windows 10 Drivers and Hardware
    Not recognising any USB devices: Suddenly, from one day to the next, my W10 stopped to recognise any externally connected devices. I've tried using my USB hub, I've tried plugging 4 different usb->micro USB cables(to get the faulty cable out of the equation) to the front of my PC as to the back where the...