Windows 10: USB old drivers

One would think all drivers would be updated with1903.
But apparently my drivers for usb mass storage devices are all dated
6/31/2006 while the 3.0 hubs are dated 3/18 2019.

:)

 

I Need SM-USB 007 Driver

Hi,

Thank you for your reply.

I suggest you to follow the steps below and check if it helps.

Method 1: Troubleshoot

Windows 10 has a built-in troubleshooter to check and fix issues with hardware and devices. I would suggest you to run this troubleshooter to check if the issue is with your USB. Refer these steps:

• Press Windows key +X, select Control panel
• Change the view by option on the top right to Large icons
• Click on troubleshooting and click on the view all option on the left panel
• Run the Hardware and devices troubleshooter

Method 2.

Try updating the latest USB devices from the manufacturer's website and check if the issue persists.

Follow the steps to update the USB drivers:

a. Press Windows key + X key and click Device Manager.

b. Expand the USB driver.

c. Right-click on the USB and click on Update driver software.

d. Restart the computer and check.

Hope this helps. If the issue remains unresolved, please get back to us and we would be happy to help

 

USB HDD driver??

Running HP ENVY 750-514 with Windows 10. Internal drive bays are full so am trying to use an external SATA 200Mb Samsung SP2004C drive connected through a USB 3.0 to SATA Hard Drive Adapter (drive has some old data I want to transfer). The drive is recognized
in ControlPanelDevices but doesn't list in Windows Explorer, therefore it's not accessible.

Device properties list the device as SAMSUNG SP2004C SCSI Disk Device, and list driver details as using DISK.SYS, EhStorClass.sys, or partmgr.sys. But SCSI?? It's a SATA device??

Another drive connected through USB is recognized as Seagate FreeAgent USB Device, and list driver details as using the same three files.

Anyone suggestions please? Thanks.

 

USB composite device "driver error"

Can you send us a screenshot of the error message? We suggest uninstalling and re-installing USB drivers and check if the issue persists. To do that, please follow these steps:

• Right-click on the Start button and select Device Manager.
  
• Expand Universal Serial Bus controllers.
• Right-click on the first USB controller under Universal Serial Bus controllers, and then click on
  Uninstall to remove it.
• Repeat these steps for the entire USB controller under Universal Serial Bus controllers.
• Restart the computer. Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.

Regards.