Windows 10: USB ports changing location

Hello i have an issue with my Lenovo Ideacentre pc running windows 10. I have a12 port powered hub that is connected to the usb port on the rear of the pc, the problem is that it keeps "forgetting" that it is connected to the hub. When i reconnect to one of the ports on the front of the machine there are 4( 2 x usb 2 and2 xusb 3) it works fine, if i pull the rear usb connection to the hub out and put it back in it will work fine until i shut down then it drops out again. I have 2 printers a flight simulator stereo speakers connected to the hub Not a massive problem but annoying none the less. Any help would be much appreciated. Dave.

:)

 

USB Port Oddities


Ok, let's see it with pictures step-by-step. First right-click on the USB device and select Update driver software:





Then select Browse my computer for driver software (LAST option) :





The select Let me pick from a list of device drivers on my computer (LAST option) :





Then select the standard driver from the list and click next:





Click next/OK as required to complete installation. Repeat the steps for all Intel USB devices. Finally click on each USB root device and press DEL to delete it, reply YES when asked. After deleting all USB root devices restart the computer.

I hope this is detailed enough...

 

USB ports

Hi Frank,

Inserting and removing a USB device repeatedly may cause the USB port to stop responding. When the port is in this state, it no longer recognizes any USB device, and the USB device will not work.

Here are few things that you can do to resolve the issue:

Use Device Manager to scan for hardware changes. After your computer scans for hardware changes, it might recognize the USB device that is connected to the USB port so that you can use the device.

To scan for hardware changes, follow these steps:

• Click Start, and then click Run.
  
  Note If you are running Windows Vista, click Start, and then use the Start Search box.
• Type devmgmt.msc, and then click OK. Device Manager opens.
• In Device Manager, click your computer so that it is highlighted.
• Click Action, and then click Scan for hardware changes.
• Check the USB device to see whether it is working.

Turn off Allow the computer to turn off this device to save power.

• In the Device Manager dialog box, expand Universal Serial Bus controllers, right-click USB Root Hub, and then click Properties.
• In the USB Root Hub Properties dialog box, click the Power Management tab. Uncheck the
  Allow the computer to turn off this device to save power
  box.
  

Let us know how it goes after performing the suggested troubleshooting steps.

 

Changing the Port settings for Serial-USB.

Hi,



Thank you for writing to Microsoft Community Forums.

If you want to change the port settings, please follow the steps mentioned below:

1. Open Device manager (right click on start button
   and then on Device manager).
   
2. Then expand port (COMS & LPT).
   
3. Then right click on Prolific USB-to Serial Comm Port and then on properties.
   
4. Go to port settings and click on Advanced.
   
5. You will be able to make the changes on this screen.
   

Hope this helps.