Windows 10: using my recovery media disk set, what do I click on so that it gets booted from the...

What do I click on so that the recovery media is booted correctly

:)

 

BSOD Recovery Media Fails

Hi,

This issue might have occurred when the boot files are missing or corrupted.

I suggest you re-built the boot record by following the below commands and check if it helps.

You will have to use Windows 10 installation media to follow the steps to boot into Recovery Environment and try to rebuild BCD.

Step 1: I suggest you to create an installation media for
Windows 10 using the media creation tool:

Installing Windows 10 using the media creation tool

Step 2: After preparing the installation media, insert it hard reboot the device and follow the below:

• Boot into Windows Recovery Environment using the Windows 10 installation media.
• Click on Repair your computer.
  
• Click on Troubleshoot and in the Advanced options.
• Select Command Prompt. Type the following commands into the prompt and press Enter key after each command.
  • bootrec /fixmbr
  • bootrec /fixboot
  • bootrec /scanos
  • bootrec /rebuildbcd

5. Restart the computer.

NOTE: Modifying BIOS/ complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft
cannot guarantee that any problems resulting from the configuring of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.

Hope it helps. Reply to the post with an updated status of this issue for further assistance.

 

Installation media boots to command prompt

I've just booted from known working install media to see exactly what it does when booting. The sequence of events is...

1. Windows logo on a black screen
2. circling dots appear beneath the logo
3. light blue 'Please wait' screen with circling dots
4. a command prompt window (very briefly)
5. the initial Setup page appears

Do you see steps 1-3? If so, it appears you have stopped at step 4, suggesting that something on the disc cannot be read.

Does the disc boot properly in another machine? If so, try cleaning the laptop's drive lens then try booting from the disc again.

If not, make new install media with Microsoft's Media Creation Tool, either as a bootable USB, on an ISO that you can burn to another disc. At Step 8 in Option One of this tutorial you can choose between making a USB or an ISO.

Download Windows 10 ISO File

 

Disk boot failure after removing old Vista partition

Thank you for the reply, muchomurka! As I indicated in my post, I have already tried all the steps you suggested to no avail:

- I cannot choose startup repair since the computer does not boot from the installation media
- I cannot use command prompt since the computer does not boot further than the POST screen
- I have disconnected and tried out all hard drives individually.

Since I had Win 10 up and running a few hours ago, I can say with 100% certainty that none of the hardware is faulty.

The real mystery is, how come the system won't boot from any media without an empty disk containing an old Vista boot sector being on top of the boot priority list? And which steps to take now that I've cleaned this disk and it does not exist anymore?

Would appreciate any ideas and pointers!