Windows 10: Utilise cellular and ethernet network adapters simultaneously in Windows 10

In windows 7 I could always do a remote session into a network over 4g and still utilise the ethernet adapter to access the local subnet and its devices from a remote location. Windows 10 build any build... if WWAN network adapter [4g] in use, the operating system will drop the active connection if the network adapter is enabled. How can I get the network adapters to work simultaneously in Windows 10?

:)

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

cellular network adapter

Hi,

I have a think pad x260 and when i insert a modem, its not visible in drives or network.

I tried looking for cellular adapter in my adapters list but i realize its missing.

My question is, how do i add this adapter in window 10 pro os?

any help is greatly appreciated.

 

Cellular/SIM connection not available/disappearing

Hi,

A faulty cellular adapter is one of the possible reasons why the cellular connection is disappearing from the laptop. A disabled adapter in the Network Connections Settings can also be the cause of this issue. We suggest you to enable the cellular connection
in the Network Connections settings. You can follow the steps below:

• Press the Windows key.
• Type View Network Connections.
• Press the Enter key.
• Right-click on the cellular adapter and click Enable.

Should you need further assistance, don't hesitate to get back to us.