Windows 10: What are the advantages of using a device with 32GB of RAM for Microsoft projects?

Hello everyone, I am currently considering upgrading my device's RAM to 32GB for Microsoft projects, but I am not sure if it is worth it. After doing some research, I have found some advantages of using a device with 32GB of RAM for Microsoft projects: Increased performance: With 32GB of RAM, your device can handle more data and processes at once, resulting in faster performance and less lag. Better multitasking: With more RAM, you can run multiple programs and applications simultaneously without experiencing any slowdown. Improved productivity: With faster performance and better multitaskin

:)

 

16gb ram vs 32gb ram Upgrade

8 GB's is what I would tell everybody to have as a minimum. For gamer or power user, I suggest going to 16GB of RAM. 32GB or more RAM I usually only see for people who are running lots of VM's, databases, or high end rendering type applications.

 

RAM Upgrade to 32GB, windows 10 won't start

1. Double check with your MB manual if the RAM is on the compatibily list
2. Make sure all the RAM sticks are firmly seated
3. Go into BIOS, under System Status and check for Total Physical RAM. Should be 32GB
4. Most of the time, The RAM voltage is set to Auto, manually set the voltage according to the RAM Spec.
5. If all fails, relax the RAM timing a little bit.

 

Project to this PC Password setting

Hi,



Thank you for writing to Microsoft Community Forums



We understand your concern as you are unable to cast your android device to Windows 10 PC. In order to get clarity and to assist you accordingly, please reply with the answers to the questions below.

• What is the make and model of the PC?
• What is the Android version installed on the device?

Meanwhile, we would suggest you to perform these steps and check if you are able to cast the device.

1. Press Windows + I key to open
   Settings.
2. Click on System and then click Projecting to this PC.
3. Under Some Windows and Android devices can project to this PC when you say it’s OK select the drop down to
   Available everywhere.
4. Now under Ask to project to this PC select First time only.
5. Under Require PIN for pairing select Never.
6. Now under This PC can be discovered for projection only when it’s plugged into a power source toggle the switch to On/Off.

Once you set these settings follow the steps below.

1. Press Windows + S key together and type
   Connect.
2. Now open Settings on your Phone and click on
   Connected devices.
3. Then select Cast and choose the PC
   name

Regards,



Aditya Roy

Microsoft Community – Moderator