Windows 10: what is best for privacy, enable telemtry with it set to 0 or just disable it?

i have an annyoing "some of these settings are hidden or managed by your organization" message in my settings. i googled how to remove it and came across a site that said i should enable telemtry and set it to 3. it didn't work, however im not sure what to set it back too, i want the option that is best for privacy.

submitted by /u/swegling
[link] [comments]

:)

 

Ensure Trim is Enabled?

I have read several articles on Trim and it seems like my settings are opposite of what the articles say. All articles say the setting should be "0" for Trim to be enabled.

I followed the steps to verify the status and below is what my system reports.

C:\WINDOWS\system32>fsutil behavior query DisableDeleteNotify

NTFS DisableDeleteNotify = 0 (Disabled)

ReFS DisableDeleteNotify = 0 (Disabled)

so I went through the steps to enable Trim and got this message-

C:\WINDOWS\system32>fsutil behavior set DisableDeleteNotify 0

NTFS DisableDeleteNotify = 0 (Disabled)

I then went through the steps to disable Trim and got this message-

C:\WINDOWS\system32>fsutil behavior set DisableDeleteNotify 1

NTFS DisableDeleteNotify = 1 (Enabled)

What should I actually be looking at to enable Trim??

Thanks!

 

my location on maps app is wrong.

Hi Don,

I suggest you to follow the below methods and check if it helps.

Kindly follow the below steps and check if it helps.

• Type Location privacy settings in search bar
  and click on Location privacy settings.
• Here you can enable/disable the Location.
• You may try to Enable/Disable the Maps app to use the
  location or not from the apps list.

Please get back to us with an update on this issue, we will be happy to assist you further.

Thank you.

 

Asrock AR-939DUAL-SATA2 ULi M1695

Here are some tips on tweaking the BIOS. The rest of your system shouldn't give you any problems.
Step one- Set time, date
Step two- In CPU settings, disable cool n quiet, set memory clock to DDR400, play with memory timings (CAS-TRAS-TRP-TRCD), which are listed in the bios in the order CAS, TRCD, TRAS, and TRP.
Leave MA timing at 2T unless you think your system can handle 1T
Step three- in Chipset settings, enable onboard LAN, disable onboard Audio, disable AGP fast write, set primary graphics adapter, and set CPU-NB and NB-SB link speed to 1000mhz.
Step four- in IDE, disable controllers you aren't using. On all drives detected, enable SMART if you can and set PIO/DMA as high as they will go.
Step five- Enable legacy USB support
Step six- Set password if you're worried about anyone screwing around with your BIOS settings
Step seven- Configure your boot sequence. I reccomend hard drive first, optical drive second, and floppy drive third.
Step eight- Save changes, boot into XP, and enjoy your computer