Windows 10: Why do I get a "Reboot and Select proper Boot device or Insert Boot media in selected Boot...

Hi, for context, I switched a gpu from two rtx 2060s to an rtx 2060 and a quadro fx 5800, and that is when issues started occuring. I thought initally that it was a boot issue so I switched to disable fast boot. That didn't work.Eventully, after a lot of time, I realized that the following steps work for getting into windows 11.1: Attempt to power into Windows 11 normally, see the "Reboot and Select proper Boot device or Insert Boot media in selected Boot device And press a key" every time I reboot" issue.2: Hold power button to shutoff3: Remove NVME ssd with windows 11 and let the computer

:)

 

"Reboot and Select proper boot device or insert boot media in selected boot device"

Hi, I recently built a new PC with a 1TB Samsung 860 EVO SSD. I'm installing Windows 10 via USB and I've made the USB top priority in the boot list. However, when I exit BIOS, It gives me an error saying "Reboot and Select proper boot device or insert
boot media in selected boot device and press a." Is their a solution to this?

 

reboot and select proper boot device or insert boot media in selected boot device and press a key

Hi,



In order for us to help you with the error message "reboot and select proper boot device or insert boot media in selected boot device and press a key" on your computer, you can refer to the response of
Vinod Archak on this
link. This will provide you steps on how to change
the Drive Boot Order in BIOS.

For instance, that it failed to work you can also check
Ratandeep response on the same link.

Let us know how it goes.

 

reboot and select proper boot device

Alright whenever I try and boot to my SSD (boot drive) my computer will end up saying "reboot and select proper boot device or insert boot media in selected boot device and press a key". However if I use the same SATA and power connections and attach my Linux hard drive, with no changes to the BIOS, it will boot just fine. If I have my SSD set up as a slave drive, I can access the files fine and browse the drive as if nothing is wrong. Anyone know why this is happening?

Specs:
Mobo: ASUS M4A79XTD evo
CPU: AMD Phenom II X4 965
RAM: 2x(2x 2GB A-Data Gaming Series)
SSD1: Kingston SSDNow 64GB
SSD2: OCZ Onyx 32GB
HDD: WD Caviar Black 640GB
Linux HDD: Hitachi Deskstar 320GB
DVD Drive: Some LiteON drive
Graphics card: AMD Radeon HD 6950

If anyone has an idea as to why this is happening, please let me know. The system has been working fine up until I took it apart earlier to clean it out.