Windows 10: wifi wont conect printer to computer

wifi will not comuicate printer nd computer i tried everything

:)

 

Win10 computer suddenly unable to access printer on home wifi

For some reason, the printer lasted less than 24 hours printing correctly, and now I again can't fix it, even by doing what "worked" before (Comment #6 upthread).

Regarding the static IP suggestion:

1. The printer is connected via USB to a Windows 7 computer on the home network. It's not on the network by IP address. Here is a screenshot of the printer port properties.
   
   
2. Although there ARE "headaches" as is said above, the vast majority of the other computers on the home wifi network, NEVER have had a problem printing to it. And this applies to computers that have run XP, Win7, Win10, and MacOS. For the most part until now, it's included the particular Win10 computer in question.
3. If I still might be able to give it a static IP address, will this affect the other computers that have been able to print to it fine using printer name?

 

Canon printer wifi trouble

Set a static IP on the printer else each time it switches off and on may get different ip which may not function correctly
Try
Delete the Printer after setting static ip

Devices and printer
>add printer
>>Add local printer (not network even though on wifi)
>>>Create new port - click standard Tcp/Ip
>>>>enter ip address of printer that set before and any port name
Select the printer driver from list

Try a test print to see if working then switch off and on and see if come back online

*66725-afb6e8cc8e67e4bb805a02c99165c983.jpg*

*66726-229a91b0c79f6b4bc0c7c78a49560e3f.jpg*
*66727-318c2547253e90800c3d464fca382dbe.jpg*

If still stays offline ,Open printer in Devices and printer
Click printer
untick use offline
turn printer off and On
*66728-2b757782bdfeb90ce43b66b06f017701.jpg*

See if comes back online

Network Printer can either be set by Ip address or Printer network name
Static ip always the best to set

 

Printer will not connect to wifi network.

The printer was working fine until one day a WiFi Thermostat was installed. Since that day, if I attempt to get the printer to connect, it

disconnects the computer's WiFi and the printer connects and prints with the apps. If I re-enable the computer WiFi, the printer goes offline.

On the Internet Access popup (from the task bar), the printer is listed with the word "Open" and a warning about "People might be able to see data sent over this network".

It seems like a setup error but none of the troubleshooters are any help and neither is the printer setup options. Can you offer any suggestions?

regards,

andrew