Windows 10: Will cloning a fragmented hard drive onto a SSD cause problems?

I have a gaming laptop with a HDD, and I want to clone it to an SSD with Macrium Reflect. The problem is that it appears that my hard drive is nearing failure as it's constantly on 100% disk usage (even after doing every possible software fix), and when I use Window's defragment tool, it says that the drive is 24% fragmented but when I go to optimise/defrag the drive, it gets stuck on a certain point for hours oj end. I wanted to know if cloning such a fragmented disk would lead to problems on the new SSD?

submitted by /u/Too-Much-Josh
[link] [comments]

:)

 

Moving to SSD. Clone or not to clone?

Part of how I keep my SSD fast is to clone it to a platter drive, then clone back. You just want to make sure that you are only cloning teh used space, and not the empty space.


So, again, I isntall Windows to the ssd. Clone to platter drive, then clone back.

I am not sure why, but if I do not do the clone step, the drive's speed, and windows booting, decreases substantially within a week or so.

I am using a Corsair F60 SSD and a Western Digital 500AAKS as drives, and using the free version of Acronis that WD provides, if any of that matters. I am not sure, at this point.

 

Cloning from 1TB to 2TB hard drive

Whats a good free imaging/cloning program? I have a 1TB hard drive with Win7 and I want to seamlessly migrate my stuff to a 2TB hard drive. Any suggestions?

 

Moving to SSD. Clone or not to clone?

I kinda agree with you, but on a wholr, do not. While I have done things a bit differently than this specific situation, by installing Windows directly to the SSD, and cloning after, my testing shows that there are no issues doing this, very little that can go wrong, provided your system is stable.

There are certain features that must be disabled in this situation, like auto defrag and such, but even with a fresh install to the SSD, you need to take steps to ensure that you SSD performs properly, regardless of how the data got there.

Arming yourself with a bit of knowledge can go a long way.

Installing the latest chipset driver, and the RST Tools, will ensure optimal performance of the SSD. but rather than taking my advice, I suggest the OP takes a look here:

http://blogs.dirteam.com/blogs/sand...7-and-ssds-to-clone-windows-or-reinstall.aspx

Installing The SSD - Install A Solid State Drive In Your Notebook | Tom's Hardware

Keep in mind, also, Digibucc, that many retail drives include software and such that very specifically is to be used to ttranser the OS from an existing mechanical drive to an SSD, and if there really was alot fo issues stemming from the cloning process, they would not have packages like that, simply to eliminate tech support costs. While not the optimal option, cloning is NOT a bad thing, as long as you take the nessecary steps.