Windows 10: Will not factory reset- Surface Pro 6 Windows10

I have attempted to reset my computer both saving files and well as factory reset, neither completed. Error read that it was unable to complete and that nothing had changed. I did try the suggested command prompt way and it stated failed. Please help!

:)

 

SURFACE PRO 3 RESET TO FACTORY DEFAULTS PROBLEM

The camera caused a system freeze every time it was activated so I thought why not restore.

• I attempted to reset my Surface Pro 3 to Factory defaults.
• The Surface Pro made it to 1% then crashed.
• Now it is in a reboot loop.

I have tried several times and now it gives an "Unable to reset your PC. A required drive partition is missing" error.

Do you have any suggestions on how to make it work again?

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?

 

SURFACE PRO 3 RESET TO FACTORY DEFAULTS PROBLEM

Hi,

Thank you for posting to Microsoft Community.

The error “A required drive partition is missing” usually occurs when you attempt a system reset or refresh in Windows and the MBR or BCD record is corrupted.

I would suggest you to create a recovery drive. You may go through this article on ‘Creating
and using a USB recovery drive’ to get you through this. Please follow the steps on ‘How to reset your Surface to factory conditions using a downloaded recovery image’ in the same article to get you through the factory reset.

Disclaimer: A reset returns your Surface to its factory settings. It deletes all of your personal files, resets your settings, and removes all apps that you installed.

Hope it helps.

Aaron Summith

Microsoft Community - Moderator