Windows 10: WIN 10 - Reboot from Bugcheck

Hello!

Have been encountering constant reboots with my machine, I checked the event viewer which shows the reboot is caused from a bugcheck.

I have installed windbg and analysed the memory dump.

analyses results:


IRQL_NOT_LESS_OR_EQUAL aAn attempt was made to access a pageable or completely invalid address at aninterrupt request level IRQL that is too high. This is usuallycaused by drivers using improper addresses.If a kernel debugger is available get the stack backtrace.Arguments:Arg1: ffffda90401b173c, memory referencedArg2: 000000000000000d, IRQLArg3: 0000000000000001, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation only on chips which support this level of statusArg4: fffff8015d4c7640, address which referenced memoryDebugging Details:------------------KEY_VALUES_STRING: 1 Key : Analysis.CPU.Sec Value: 2 Key : Analysis.DebugAnalysisProvider.CPP Value: Create: 8007007e on PBS_COE_OPS Key : Analysis.DebugData Value: CreateObject Key : Analysis.DebugModel Value: CreateObject Key : Analysis.Elapsed.Sec Value: 2 Key : Analysis.Memory.CommitPeak.Mb Value: 62 Key : Analysis.System Value: CreateObjectADDITIONAL_XML: 1BUGCHECK_CODE: aBUGCHECK_P1: ffffda90401b173cBUGCHECK_P2: dBUGCHECK_P3: 1BUGCHECK_P4: fffff8015d4c7640WRITE_ADDRESS: ffffda90401b173c Nonpaged poolBLACKBOXBSD: 1 !blackboxbsdBLACKBOXNTFS: 1 !blackboxntfsBLACKBOXWINLOGON: 1PROCESS_NAME: SystemTRAP_FRAME: ffffbd809c0eedc0 -- .trap 0xffffbd809c0eedc0NOTE: The trap frame does not contain all registers.Some register values may be zeroed or incorrect.rax=fffff8015d4c7640 rbx=0000000000000000 rcx=ffffda8ff80af2e0rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000rip=fffff8015d4c7640 rsp=ffffbd809c0eef58 rbp=ffffee09d0eedb50 r8=00000000036e101b r9=0000000000000000 r10=0000fffff8015d4cr11=ffffad7b75c00000 r12=0000000000000000 r13=0000000000000000r14=0000000000000000 r15=0000000000000000iopl=0 nv up ei pl nz ac pe cynt!HalpTimerClockInterrupt:fffff801`5d4c7640 48895c2410 mov qword ptr [rsp+10h],rbx ss:0018:ffffbd80`9c0eef68=ffffda8ff80af2e0Resetting default scopeSTACK_TEXT: ffffbd80`9c0eec78 fffff801`5d5ef929 : 00000000`0000000a ffffda90`401b173c 00000000`0000000d 00000000`00000001 : nt!KeBugCheckExffffbd80`9c0eec80 fffff801`5d5ebc29 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69ffffbd80`9c0eedc0 fffff801`5d4c7640 : fffff801`5d408705 00000000`c4bfff87 ffffda8f`f80af2e0 ffffda8f`f80af390 : nt!KiPageFault+0x469ffffbd80`9c0eef58 fffff801`5d408705 : 00000000`c4bfff87 ffffda8f`f80af2e0 ffffda8f`f80af390 ffff690b`ccccf69a : nt!HalpTimerClockInterruptffffbd80`9c0eef60 fffff801`5d5df4ca : ffffee09`d0eedb50 ffffda8f`f80af2e0 00000000`0000246c 00000000`00000000 : nt!KiCallInterruptServiceRoutine+0xa5ffffbd80`9c0eefb0 fffff801`5d5dfa37 : ffffee09`d0eedbf0 00000000`00000001 00000000`00040046 fffff801`5d4cc048 : nt!KiInterruptSubDispatchNoLockNoEtw+0xfaffffee09`d0eedad0 fffff801`5d5e154a : ffffffff`00000000 ffffbd80`9c0a7440 ffffda81`03be4040 00000000`0000246c : nt!KiInterruptDispatchNoLockNoEtw+0x37ffffee09`d0eedc60 00000000`00000000 : ffffee09`d0eee000 ffffee09`d0ee8000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x5aSYMBOL_NAME: nt!HalpTimerClockInterrupt+0MODULE_NAME: ntIMAGE_NAME: ntkrnlmp.exeSTACK_COMMAND: .thread ; .cxr ; kbBUCKET_ID_FUNC_OFFSET: 0FAILURE_BUCKET_ID: AV_nt!HalpTimerClockInterruptOS_VERSION: 10.0.19041.1BUILDLAB_STR: vb_releaseOSPLATFORM_TYPE: x64OSNAME: Windows 10FAILURE_ID_HASH: {241754bc-4b25-cacf-67c2-930f92469a9d}Followup: MachineOwner

:)

 

The computer has rebooted from a bugcheck

I have setup of windows server 2012 cluster machines.any one of the machine is always rebooting from bugcheck with below error coad.

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000094, 0xfffff801dac14256, 0xffffd001d794db30, 0x0000000000000011). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 021219-123437-01.

please suggest a solution for this i am frustrated due to this issue now..

 

System Reboot for Bugcheck 0x00000124


Hi Guys,

I recently purchased a MSI laptop (GT72VR 6RE), and upgraded Win 10 version from Home to Pro. Performed the upgrade as soon as I fired up the laptop for the first time.

Last couple of weeks, while working on Google Drive (via Chrome) the computer will suddently lock up, and after couple of seconds reboot.

Checking Event Viewer, it shows the following events:



Details for the listed events in sequence:

• The previous system shutdown at 4:48:27 PM on ‎5/‎09/‎2016 was unexpected.
• The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
• Audit events have been dropped by the transport. 0
• The driver \Driver\WUDFRd failed to load for the device ACPI\ENE0110\5&14353508&0.
• A corrected hardware error has occurred.
  
  
• A corrected hardware error has occurred. (same as above)
• The computer has rebooted from a bugcheck. The bugcheck was: 0x00000124 (0x0000000000000000, 0xffffe0002c0c2028, 0x00000000be000000, 0x0000000000800400).

It has happened twice so far and that has me bit worried.
Previous one had the following bugcheck error:

• The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff800765cd8b8, 0x0000000000000000, 0x00000000000000a0).

Would really appreciate if someone can point out anything.

It is a brand new laptop (couple of weeks old). And both the times when it crashed, I was using Chrome (google drive, or writing email etc), wasn't playing games. The CPU/GPU isn't overclocked either.

Thanks in advance.

 

"The computer has rebooted from a bugcheck. The bugcheck was: 0x00000124 " BSOD on Windows 10.

Hi Jayan,



Please reply to a few questions asked below:

• Since when are you facing the above issue? Did you make any recent changes to the computer?
• Did you try booting the computer in Safe mode and check if the issue persists?

We are not able to access the link shared in the above post. If haven’t tried, please follow the steps suggested above and check if similar issue occurs on the computer.



Write to us with the answers to the above questions and the status of bugcheck error code received on the computer for further assistance.
Your reply is most important for us to ensure we assist you accordingly.



Thank you.