Windows 10: Windows 10 10586 (1511) upgrade fails / error 0x8007002C - 0x4000D

Discus and support Windows 10 10586 (1511) upgrade fails / error 0x8007002C - 0x4000D in Windows 10 Installation and Upgrade to solve the problem; I am trying to perform the November update (1511) on this computer. (starting from the previous Windows 10 version) Since I have another problem where... Discussion in 'Windows 10 Installation and Upgrade' started by Sonar637, Dec 4, 2015.

  1. Sonar637 Win User

    Windows 10 10586 (1511) upgrade fails / error 0x8007002C - 0x4000D


    I am trying to perform the November update (1511) on this computer. (starting from the previous Windows 10 version)
    Since I have another problem where it doesn't appear in Windows Update (despite fulfilling many requirements to make it appear), I am limited to perform the upgrade with the Media Creation Tool (which has re-implemented build 10586, 1511 into it after been pulled out)

    However, the upgrade process failed when reaching 76%. After system restore and reboot, the following pop-up appeared:


    Windows 10 10586 (1511) upgrade fails / error 0x8007002C - 0x4000D [​IMG]


    Any ideas why this is happening? I upgraded this computer from Windows 7 to Windows 10 back in august, without any issue. Only now it did not find the November update through Windows Update and when using the Media Creation Tool it fails.

    :)
     
    Sonar637, Dec 4, 2015
    #1
  2. GBorn Win User

    Windows 10 hangs at 96%, with ERROR 0x8007002C_0x4000D, Failed Second BOOT Phase w/ an ERROR during Migrate_DATA Operation

    Remove your Antivirus software Windows 10: Upgrade error 0x8007002C-0x4000D
     
    GBorn, Dec 4, 2015
    #2
  3. GBorn Win User
    GBorn, Dec 4, 2015
    #3
  4. Phone Man Win User

    Windows 10 10586 (1511) upgrade fails / error 0x8007002C - 0x4000D

    I had a similar problem with my system that was upgraded from W8.1 and I decided to do a clean install with the new 1511 ISO and it is a much better running system now.

    Jim *Cool
     
    Phone Man, Dec 4, 2015
    #4
  5. Sonar637 Win User
    Sorry, but a clean install is not an option here.
    This computer is quite an old device (eMachines ET1870) and it doesn't have any hardware drivers available on the net.
    I have done a clean install before and it consumes a lot of time, something I'm short of right now. Plus, as I already said, it is only achievable with having a whole arsenal of your (up-to-date) system drivers available on a (reliable) webpage.

    There has to be an alternative.
    I have read about log files been dumped somewhere in a hidden 'Panther' folder. I've found them and I can find traces of the error message inside it. If someone could analyze it and find the roots of the issue.
     
    Sonar637, Dec 4, 2015
    #5
  6. Sonar637 Win User
    I've read that many people had issues with the update because of their antivirus software.
    I uninstalled Avira Antivirus, Malwarebytes anti-malware and CCleaner (which also seemed to cause issues with most people) and ran the upgrade again.
    Failed again.

    At the third stage, at 76%, it immediately jumped to 93% and immediately rebooted, giving me the "restoring your previous version" screen again...

    I really need help on this (and not clean install as a solution)

    Edit: side note, I'm actually wondering why this 1511 update is not even appearing in the Windows Update screen in the first place (always telling me I'm up-to-date, while I'm not) Could this be a root of the cause?

    Edit 2:

    These are the setuperr.log files from both installation attempts:

    First attempt (yesterday):
    Code: 2015-12-05 11:07:22, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-05 11:07:24, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-05 11:07:33, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Suspend(1066): Result = 0xC1800104 2015-12-05 11:07:33, Error MOUPG CSetupManager::ExecuteInstallMode(724): Result = 0x800705BB 2015-12-05 11:07:33, Error MOUPG CSetupManager::ExecuteDownlevelMode(389): Result = 0x800705BB 2015-12-05 11:07:34, Error MOUPG CSetupManager::Execute(232): Result = 0x800705BB 2015-12-05 11:07:34, Error MOUPG CSetupHost::Execute(371): Result = 0x800705BB 2015-12-05 11:12:02, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-05 11:12:03, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-05 11:12:03, Error CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7] 2015-12-05 11:12:03, Error CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7] 2015-12-05 11:12:05, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-05 11:12:05, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-05 11:12:21, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-05 11:13:03, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-05 11:13:05, Error CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7] 2015-12-05 11:13:05, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session[gle=0x000000b7] 2015-12-05 11:13:17, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-05 11:15:03, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-05 11:15:25, Error CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7] 2015-12-05 11:15:39, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-05 11:15:43, Error CONX Failed to get class data from printer 80070057 2015-12-05 11:15:45, Error CONX Failed to get class data from printer 80070057 2015-12-05 11:15:45, Error CONX Failed to get class data from printer 80070057 2015-12-05 11:15:45, Error CONX Failed to get class data from printer 80070057 2015-12-05 11:15:45, Error CONX Failed to get class data from printer 80070057 2015-12-05 11:17:19, Error CONX Failed to get inf path SYSTEM\CurrentControlSet\Control\Network\{4d36e975-e325-11ce-bfc1-08002be10318}\{58474950-424f-0058-cfe8-aba2187557f2} 2015-12-05 11:17:19, Error CONX Failed to add net component 80070002 2015-12-05 11:17:20, Error CONX Failed to open inf key SYSTEM\CurrentControlSet\Control\Network\{6bdd1fc5-810f-11d0-bec7-08002be2092f}\{652def3d-35e7-4159-b8a0-084dcde0ea3e} 2015-12-05 11:17:20, Error CONX Failed to add net component 80070002 2015-12-05 11:27:16, Error [0x0803b6] MIG Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD 2015-12-05 11:27:39, Error [0x0803b6] MIG Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD 2015-12-05 11:27:45, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: "id" attribute is mandatory. void __cdecl Mig::CMXEMigrationXml::LoadSupportedComponent(class UnBCL::XmlNode *,int,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent *) 2015-12-05 11:27:58, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{39CC25F3-AF21-4C42-854D-0524249F02CE} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *) 2015-12-05 11:28:20, Error CSI 00000001 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #122350# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c), bytes ( 12 (0x0000000c) ): 6e006c002d004e004c000000 }) [gle=0x80004005] 2015-12-05 11:28:46, Error [0x0808fe] MIG Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d 2015-12-05 11:28:48, Error CSI 00000002 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #212475# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c), bytes ( 12 (0x0000000c) ): 6e006c002d004e004c000000 }) [gle=0x80004005] 2015-12-05 11:29:01, Error [0x0803b6] MIG Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD 2015-12-05 11:32:29, Error [0x0808fe] MIG Plugin {526D451C-721A-4b97-AD34-DCE5D8CD22C5}: [shmig] Failed to get preferred homegroup with hr=0x80070490 2015-12-05 11:32:31, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0 2015-12-05 11:32:34, Error [0x0808fe] MIG Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Root device 'ROOT\PRINTER\0001' does not have driver. 2015-12-05 11:32:34, Error [0x0808fe] MIG Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Root device 'ROOT\PRINTER\0002' does not have driver. 2015-12-05 11:33:17, Error CSetupAutomation::Resurrect: File not found: C:\$WINDOWS.~BT\Sources\Panther\automation.dat[gle=0x00000002] 2015-12-05 11:33:17, Error SP CSetupPlatform::ResurrectAutomation: Failed to resurrect automation: 0x80070002[gle=0x00000002] 2015-12-05 11:33:18, Error [0x0803b6] MIG Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD 2015-12-05 12:16:20, Error MIG COnlineWinNTPlatform::AddPathToSearchIndexer - Failed to create CSearchManager instance, error: 0x80070422[gle=0x000003f0] 2015-12-05 12:22:45, Error [0x0808fe] MIG Plugin {6CF7C0FC-91DD-4D47-9B6F-0769F8AE68D2}: [TpmScr] - check completion signature failed, skip this folder. file=C:\$WINDOWS.~BT\Work\MachineSpecific\Working\srcworking\agentmgr\CCSIAgent\005A9238\completed.txt 2015-12-05 12:22:46, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: ParseRegistryIfBridgeExists: query bridge presence key failed 0x139f, bridge present = 0 2015-12-05 12:22:47, Error [0x0808fe] MIG Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: DISPLAY\DEFAULT_MONITOR\1&8713BCA&0&UID0 -> Migrated [0000000000000000], configured [monitor.inf] and not present. 2015-12-05 12:22:47, Error [0x0808fe] MIG Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: ROOT\PRINTER\0000 -> Migrated [0000000000000000], configured [null] and has problem CM_PROB_REINSTALL (18) [0xC0000493]. 2015-12-05 12:22:47, Error [0x0808fe] MIG Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: ROOT\PRINTER\0001 -> Migrated [0000000000000000], configured [null] and has problem CM_PROB_REINSTALL (18) [0xC0000493]. 2015-12-05 12:22:47, Error [0x0808fe] MIG Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: ROOT\PRINTER\0002 -> Migrated [0000000000000000], configured [null] and has problem CM_PROB_REINSTALL (18) [0xC0000493]. 2015-12-05 12:22:47, Error [0x0808fe] MIG Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: ROOT\PRINTER\0003 -> Migrated [0000000000000000], configured [null] and has problem CM_PROB_REINSTALL (18) [0xC0000493]. 2015-12-05 12:22:48, Error [0x08038d] MIG Failure while calling IPostApply->ApplySuccess for Plugin={ServerPath="Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll", CLSID={43CCF250-2A74-48c6-9620-FC312EC475D6}, ThreadingModel=Apartment}. Error: 0x80070002 2015-12-05 12:22:48, Error SP Error READ, 0x00000002 while gathering/applying object: apply-success, Action,CMXEPlugin,C:\$WINDOWS.~BT\Sources\ReplacementManifests,Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll,{43CCF250-2A74-48c6-9620-FC312EC475D6},Apartment. Will return 2[gle=0x000000cb] 2015-12-05 12:30:43, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: "id" attribute is mandatory. void __cdecl Mig::CMXEMigrationXml::LoadSupportedComponent(class UnBCL::XmlNode *,int,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent *) 2015-12-05 12:31:01, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{39CC25F3-AF21-4C42-854D-0524249F02CE} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *) 2015-12-05 12:31:20, Error MIG Could not apply data unit for srcworkingalias\agentmgr\CCSIAgent\005AE70A\USER00000000\7040140-beautiful-landscape-sunset-wallpaper-hd.jpg: class Mig::SideAwareWin32Exception: Error creating destination file.: Het bestand bestaat. [0x00000050] void __cdecl Mig::CreateFileFromStream(const unsigned short *,class UnBCL::Stream *,struct ILocalProgress *,int)[gle=0x00000050] 2015-12-05 12:31:20, Error WorkDir restore failed. Last error: 0x00000050[gle=0x00000050] 2015-12-05 12:31:20, Error SP pSPDoOnlineApply: Apply operation failed. Error: 0x0000002C[gle=0x00000050] 2015-12-05 12:31:22, Error SP Apply: Migration phase failed. Result: 44 2015-12-05 12:31:23, Error SP Operation failed: OOBE boot apply. Error: 0x8007002C[gle=0x000000b7] 2015-12-05 12:31:23, Error SP Operation execution failed: 13. hr = 0x8007002C[gle=0x000000b7] 2015-12-05 12:31:23, Error SP Operation execution failed.[gle=0x000000b7] 2015-12-05 12:31:23, Error SP CSetupPlatformPrivate::Execute: Failed to deserialize/execute pre-OOBEBoot operations. Error: 0x8007002C[gle=0x000000b7][/quote]

    Second attempt (today):
    Code: 2015-12-06 10:07:02, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-06 10:07:03, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-06 10:07:04, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Suspend(1066): Result = 0xC1800104 2015-12-06 10:07:04, Error MOUPG CSetupManager::ExecuteInstallMode(724): Result = 0x800705BB 2015-12-06 10:07:04, Error MOUPG CSetupManager::ExecuteDownlevelMode(389): Result = 0x800705BB 2015-12-06 10:07:04, Error MOUPG CSetupManager::Execute(232): Result = 0x800705BB 2015-12-06 10:07:04, Error MOUPG CSetupHost::Execute(371): Result = 0x800705BB 2015-12-06 10:10:15, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-06 10:10:15, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-06 10:10:17, Error CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7] 2015-12-06 10:10:17, Error CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7] 2015-12-06 10:10:18, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-06 10:10:18, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-06 10:10:38, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-06 10:10:56, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-06 10:10:58, Error CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7] 2015-12-06 10:10:58, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session[gle=0x000000b7] 2015-12-06 10:11:11, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-06 10:11:17, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-06 10:11:40, Error CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7] 2015-12-06 10:11:59, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-12-06 10:12:01, Error CONX Failed to get class data from printer 80070057 2015-12-06 10:12:02, Error CONX Failed to get class data from printer 80070057 2015-12-06 10:12:02, Error CONX Failed to get class data from printer 80070057 2015-12-06 10:12:02, Error CONX Failed to get class data from printer 80070057 2015-12-06 10:12:02, Error CONX Failed to get class data from printer 80070057 2015-12-06 10:13:21, Error CONX Failed to get inf path SYSTEM\CurrentControlSet\Control\Network\{4d36e975-e325-11ce-bfc1-08002be10318}\{58474950-424f-0058-cfe8-aba2187557f2} 2015-12-06 10:13:21, Error CONX Failed to add net component 80070002 2015-12-06 10:13:21, Error CONX Failed to open inf key SYSTEM\CurrentControlSet\Control\Network\{6bdd1fc5-810f-11d0-bec7-08002be2092f}\{652def3d-35e7-4159-b8a0-084dcde0ea3e} 2015-12-06 10:13:21, Error CONX Failed to add net component 80070002 2015-12-06 10:18:20, Error MOUPG CDlpResponseImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IDlpResponse> > > >::CheckUserCancelled(1586): Result = 0x800704D3 2015-12-06 10:18:20, Error MOUPG CDlpResponseImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IDlpResponse> > > >::Execute(1751): Result = 0x800704D3 2015-12-06 10:18:20, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::ExecuteResponse(1184): Result = 0x800704D3 2015-12-06 10:18:20, Error MOUPG CDlpActionSummary::ExecuteRoutine(196): Result = 0x800704D3 2015-12-06 10:18:20, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Execute(441): Result = 0x800704D3 2015-12-06 10:18:36, Error CONX Failed to get class data from printer 80070057 2015-12-06 10:18:36, Error CONX Failed to get class data from printer 80070057 2015-12-06 10:18:36, Error CONX Failed to get class data from printer 80070057 2015-12-06 10:18:36, Error CONX Failed to get class data from printer 80070057 2015-12-06 10:18:36, Error CONX Failed to get class data from printer 80070057 2015-12-06 10:19:11, Error CONX Failed to get inf path SYSTEM\CurrentControlSet\Control\Network\{4d36e975-e325-11ce-bfc1-08002be10318}\{58474950-424f-0058-cfe8-aba2187557f2} 2015-12-06 10:19:11, Error CONX Failed to add net component 80070002 2015-12-06 10:19:11, Error CONX Failed to open inf key SYSTEM\CurrentControlSet\Control\Network\{6bdd1fc5-810f-11d0-bec7-08002be2092f}\{652def3d-35e7-4159-b8a0-084dcde0ea3e} 2015-12-06 10:19:11, Error CONX Failed to add net component 80070002 2015-12-06 10:22:32, Error [0x0803b6] MIG Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD 2015-12-06 10:22:45, Error SP pSPRemoveUpgradeRegTree: failed to delete reg tree HKLM\SYSTEM\Setup\Upgrade[gle=0x00000005] 2015-12-06 10:22:53, Error [0x0803b6] MIG Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD 2015-12-06 10:23:00, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: "id" attribute is mandatory. void __cdecl Mig::CMXEMigrationXml::LoadSupportedComponent(class UnBCL::XmlNode *,int,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent *) 2015-12-06 10:23:10, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{39CC25F3-AF21-4C42-854D-0524249F02CE} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *) 2015-12-06 10:23:30, Error CSI 00000001 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #122350# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c), bytes ( 12 (0x0000000c) ): 6e006c002d004e004c000000 }) [gle=0x80004005] 2015-12-06 10:24:01, Error [0x0808fe] MIG Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d 2015-12-06 10:24:03, Error CSI 00000002 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #212475# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c), bytes ( 12 (0x0000000c) ): 6e006c002d004e004c000000 }) [gle=0x80004005] 2015-12-06 10:24:12, Error [0x0803b6] MIG Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD 2015-12-06 10:27:14, Error [0x0808fe] MIG Plugin {526D451C-721A-4b97-AD34-DCE5D8CD22C5}: [shmig] Failed to get preferred homegroup with hr=0x80070490 2015-12-06 10:27:14, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0 2015-12-06 10:27:18, Error [0x0808fe] MIG Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Root device 'ROOT\PRINTER\0001' does not have driver. 2015-12-06 10:27:18, Error [0x0808fe] MIG Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Root device 'ROOT\PRINTER\0002' does not have driver. 2015-12-06 10:28:00, Error CSetupAutomation::Resurrect: File not found: C:\$WINDOWS.~BT\Sources\Panther\automation.dat[gle=0x00000002] 2015-12-06 10:28:00, Error SP CSetupPlatform::ResurrectAutomation: Failed to resurrect automation: 0x80070002[gle=0x00000002] 2015-12-06 10:28:01, Error [0x0803b6] MIG Can't retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD 2015-12-06 11:09:50, Error MIG COnlineWinNTPlatform::AddPathToSearchIndexer - Failed to create CSearchManager instance, error: 0x80070422[gle=0x000003f0] 2015-12-06 11:15:56, Error [0x0808fe] MIG Plugin {6CF7C0FC-91DD-4D47-9B6F-0769F8AE68D2}: [TpmScr] - check completion signature failed, skip this folder. file=C:\$WINDOWS.~BT\Work\MachineSpecific\Working\srcworking\agentmgr\CCSIAgent\005A9238\completed.txt 2015-12-06 11:15:56, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: ParseRegistryIfBridgeExists: query bridge presence key failed 0x139f, bridge present = 0 2015-12-06 11:15:58, Error [0x0808fe] MIG Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: DISPLAY\DEFAULT_MONITOR\1&8713BCA&0&UID0 -> Migrated [0000000000000000], configured [monitor.inf] and not present. 2015-12-06 11:15:58, Error [0x0808fe] MIG Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: ROOT\PRINTER\0000 -> Migrated [0000000000000000], configured [null] and has problem CM_PROB_REINSTALL (18) [0xC0000493]. 2015-12-06 11:15:58, Error [0x0808fe] MIG Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: ROOT\PRINTER\0001 -> Migrated [0000000000000000], configured [null] and has problem CM_PROB_REINSTALL (18) [0xC0000493]. 2015-12-06 11:15:58, Error [0x0808fe] MIG Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: ROOT\PRINTER\0002 -> Migrated [0000000000000000], configured [null] and has problem CM_PROB_REINSTALL (18) [0xC0000493]. 2015-12-06 11:15:58, Error [0x0808fe] MIG Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: ROOT\PRINTER\0003 -> Migrated [0000000000000000], configured [null] and has problem CM_PROB_REINSTALL (18) [0xC0000493]. 2015-12-06 11:15:58, Error [0x08038d] MIG Failure while calling IPostApply->ApplySuccess for Plugin={ServerPath="Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll", CLSID={43CCF250-2A74-48c6-9620-FC312EC475D6}, ThreadingModel=Apartment}. Error: 0x80070002 2015-12-06 11:15:58, Error SP Error READ, 0x00000002 while gathering/applying object: apply-success, Action,CMXEPlugin,C:\$WINDOWS.~BT\Sources\ReplacementManifests,Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll,{43CCF250-2A74-48c6-9620-FC312EC475D6},Apartment. Will return 2[gle=0x000000cb] 2015-12-06 11:23:14, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: "id" attribute is mandatory. void __cdecl Mig::CMXEMigrationXml::LoadSupportedComponent(class UnBCL::XmlNode *,int,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent *) 2015-12-06 11:23:31, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{39CC25F3-AF21-4C42-854D-0524249F02CE} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *) 2015-12-06 11:23:53, Error MIG Could not apply data unit for srcworkingalias\agentmgr\CCSIAgent\005AE70A\USER00000000\7040140-beautiful-landscape-sunset-wallpaper-hd.jpg: class Mig::SideAwareWin32Exception: Error creating destination file.: Het bestand bestaat. [0x00000050] void __cdecl Mig::CreateFileFromStream(const unsigned short *,class UnBCL::Stream *,struct ILocalProgress *,int)[gle=0x00000050] 2015-12-06 11:23:53, Error WorkDir restore failed. Last error: 0x00000050[gle=0x00000050] 2015-12-06 11:23:53, Error SP pSPDoOnlineApply: Apply operation failed. Error: 0x0000002C[gle=0x00000050] 2015-12-06 11:23:54, Error SP Apply: Migration phase failed. Result: 44 2015-12-06 11:23:55, Error SP Operation failed: OOBE boot apply. Error: 0x8007002C[gle=0x000000b7] 2015-12-06 11:23:55, Error SP Operation execution failed: 13. hr = 0x8007002C[gle=0x000000b7] 2015-12-06 11:23:55, Error SP Operation execution failed.[gle=0x000000b7] 2015-12-06 11:23:55, Error SP CSetupPlatformPrivate::Execute: Failed to deserialize/execute pre-OOBEBoot operations. Error: 0x8007002C[gle=0x000000b7][/quote]
     
    Sonar637, Dec 5, 2015
    #6
  7. Steve C Win User
    I can't scroll right to see the full error details. Please post the error file with your message.

    Have you run sfc /scannow to check for any problems?
     
    Steve C, Dec 5, 2015
    #7
  8. Sonar637 Win User

    Windows 10 10586 (1511) upgrade fails / error 0x8007002C - 0x4000D

    Here you go.

    I've done the sfc as you requested, it found corrupt files which could not be fixed (strange, it isn't quite long ago, 3 months, since I've done an SFC at which it found no issues)
    CBS.log also contained within the attachements. (had to be zipped due to excess in file size)
     
    Sonar637, Dec 5, 2015
    #8
  9. Steve C Win User
    If SFC /SCANNOW finds problems it can't fix, try running DISM /ONLINE /CLEANUP-IMAGE /RESTOREHEALTH from a command prompt. Then try SFC /SCANNOW again until it is clear (may to repeat several times). Restartr between each scan.

    Your error log shows lots of problems with printers - maybe that's a clue what's wrong? You could try uninstalling all printers & driver software, do the Windows 10 update, then reinstall them.

    Also see https://social.technet.microsoft.com...ion-of-windows which give a solution to the error "Migration phase failed. Result: 44" which you have.
     
    Steve C, Dec 5, 2015
    #9
  10. Sonar637 Win User
    What does the DISM /ONLINE /... command actually do?
    I've just read that DISM has something to do with corrupt files prevent windows updates from installing... Perhaps also a reason why 1511 does not show up in Windows Update in the first place?

    Indeed, a lot of errors with printers. I have printer software from an HP Officejet Pro 8600 installed, never had any issue with it, until now maybe.
    I don't understand what you mean with "& driver software.." though, it redirected me to this page.
    Update Windows Drivers
    What other driver software do you mean?

    That post tells me to delete everything in the Softwaredistribution folder. I've done that this morning aswell, but it doesn't make 1511 appear in Windows Update genuinely, still had to do it via the Media Creation Tool.
     
    Sonar637, Dec 5, 2015
    #10
  11. Steve C Win User
    Just Google DISM /ONLINE ... or search this forum and you will plenty of information. I've used the command several times to cure problems with Windows system files.

    The procedure for complete removal of printer driver software is:

    • Turn on the printers you want to remove
    • Run Device Manager
    • Right click each printer and select uninstall
    • Check the box "Delete the driver software for this device" then click OK

    This should remove the printer and all drivers. I would also select View / Show hidden devices in Device Manager and uninstall any hidden printers which may be causing problems.

    Incidentally, please ensure you have made a full system backup before you start modifying your system.
     
    Steve C, Dec 5, 2015
    #11
  12. Sonar637 Win User
    I've tried the RestoreHealth command, it gave me an error, telling me it couldn't find the source files. (0x800f081f)
    (CheckHealth said there were no problems, ScanHealth said there were repairable problems... *Confused )

    About the printer: Is it also an option to just uninstall the Officejet 8600 components through the windows "uninstall a program" function? That also erases them out of device manager, I've found that out before.
     
    Sonar637, Dec 5, 2015
    #12
  13. Steve C Win User

    Windows 10 10586 (1511) upgrade fails / error 0x8007002C - 0x4000D

    It seems DISM can't locate the source files it needs. I think there is a fix for this but I don't know the answer. Maybe someone else on the forum can advise you?

    You can uninstall the driver software from the Programs menu but this may not remove the driver files from your PC.
     
    Steve C, Dec 5, 2015
    #13
  14. Sonar637 Win User
    The fix for that is mounting a DVD containing the Win10 ISO. I have that, except that I do not know which one I have to mount. The one back from build 10240 or Build 10586 (they one they currently offer on their site)
     
    Sonar637, Dec 5, 2015
    #14
  15. Steve C Win User
    I would expect you should use the ISO for your current Windows version.
     
    Steve C, Dec 5, 2015
    #15
Thema:

Windows 10 10586 (1511) upgrade fails / error 0x8007002C - 0x4000D

Loading...
  1. Windows 10 10586 (1511) upgrade fails / error 0x8007002C - 0x4000D - Similar Threads - 10586 1511 upgrade

  2. upgrade failed c19199000101-0x4000d

    in Windows 10 Installation and Upgrade
    upgrade failed c19199000101-0x4000d: trying to upgrade from 7 to 10 at upgrading (82%) upgrading and loading failed error code C1900101-0x4000d https://answers.microsoft.com/en-us/windows/forum/all/upgrade-failed-c19199000101-0x4000d/bdc4f2e8-965b-460b-a8f6-00e09d638281
  3. Failed: Upgrade to Windows 10 Enterprise, version 1511, 10586

    in Windows 10 Updates and Activation
    Failed: Upgrade to Windows 10 Enterprise, version 1511, 10586: The windows update 'Upgrade to Windows 10 Enterprise, version 1511, 10586' fails with 'Windows can't be installed because this PC has an unsupported disk layout for UEFI firmware'. This PC (laptop) is running Windows-To-Go (Windows 10) from a an external USB SSD. It has...
  4. Windows10 10586 / 1511 upgrade fails on boot.

    in Windows 10 Updates and Activation
    Windows10 10586 / 1511 upgrade fails on boot.: Ok, I'm pretty sure I know what's going on, but I don't know which commands to run to fix. So, Windows 10 runs into issues during the reboot portion of the upgrade. I think it's that the windows boot manager believes it's in the first partition on disk, while it's actually on...
  5. Upgrade to Windows 10 Home, version 1511, 10586 Failed 3 times

    in Windows 10 Updates and Activation
    Upgrade to Windows 10 Home, version 1511, 10586 Failed 3 times: I have a 4 week old HP notebook with Windows 10 already installed. The above Upgrade (Update??) has failed 3 times & I suspect it is the root of other problems (Can't create more user accounts, can't sign in to Cortana.) According to the web others are experiencing the...
  6. windows 10 installation/upgrade error Error 0x8007002C - 0x4000D

    in Windows 10 Installation and Upgrade
    windows 10 installation/upgrade error Error 0x8007002C - 0x4000D: I had tried from the early win10 early betas to upgrade from win 8.1 pro 64 bit. I continually got the error: "The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation" and the code "Error 0x8007002C - 0x4000D". I had tried the fixes...
  7. Fails to Upgrade to Windows 10 v.1511, 10586 (Nov.update)!

    in Windows 10 Installation and Upgrade
    Fails to Upgrade to Windows 10 v.1511, 10586 (Nov.update)!: Hi, my first post here since i start to be pretty desperate. My Win 10 (version 10.0 Build 10240) has downloaded and installed version 1511, 10586 now already five times. Every time it asks to reboot to finish the upgrade there pops up a window in the lower right corner...
  8. We couldn’t install Windows 10 - Error 0x8007002C–0x4000D

    in Windows 10 Installation and Upgrade
    We couldn’t install Windows 10 - Error 0x8007002C–0x4000D: I have been trying to update to Windows 10 from Windows 8.1 Pro 64-bit via the media creating tool, using the ISO file, so far I've gotten the same error: "We couldn’t install Windows 10 - Error 0x8007002C–0x4000D. The Installation failed in the SECOND_BOOT phase with an...
  9. 0x8007002C - 0x4000D While Upgrading Windows

    in Windows 10 Installation and Upgrade
    0x8007002C - 0x4000D While Upgrading Windows: I am currently using Windows 10 Pro Insider Preview Build 10162. I am trying to update to Build 10240 using the Media Creation Tool. However, at 93% the update fails and reverts back to Build 10162 and displays this: 0x8007002C - 0x4000D The installation failed in the...
  10. Upgrade to Windows 10 Home, version 1511, 10586 failed to install.

    in Windows 10 Installation and Upgrade
    Upgrade to Windows 10 Home, version 1511, 10586 failed to install.: I tried to download it, but it has been downloading for 24 hours and seems stuck on 58% downloaded. Help 34766
Tags: