Windows 10: Windows 10 1809 does not boot from official Windows to Go

Hi,


I downloaded the latest Windows 1809 Enterprise ISO from VLSC. Here is my experience with two different USB drives:


The following applies to two different computers with external SSD enclosures holding 500 GB Samsung EVO m.2 850 and Crucial 500 GB m.2.


I used Windows Go applet to install Windows Enterprise on the external drives. In the initial reboot, the hardware recognition took place without any issues but upon the second reboot, Windows crashed after 2-1/2 minutes with the following message:


"Stop Code DRIVER UNLOADED WITHOUT CANCELLING PENDING OPERATIONS"

This happened with both computer and both drives. The above process works fine with Windows Ent 1803.

I also used AOMEI Partition Assist 7.51 and Windows Pro 1809 to create an unofficial Windows to Go. It failed exactly as described above but worked with 1803.


I believe 1809 has a bug which causes this behavior. Any ideas?

:)

 

Windows 10 Tweaks

Pressing “Windows+Pause Break” (it’s up there next to scroll lock) opens the “System” Window.

Windows 10: In the new version of Windows, Explorer has a section called Quick Access. This includes your frequent folders and recent files. Explorer defaults to opening this page when you open a new window. If you’d rather open the usual This PC, with links to your drives and library folders, follow these steps:

• Open a new Explorer window.
• Click View in the ribbon.
• Click Options.
• Under General, next to “Open File Explorer to:” choose “This PC.”
• Click OK

credit to Lifehacker.

 

Windows 10 USB boot

Hi there, am not a windows 10 expert. I have a pc in the bedroom on windows 10, I messed up the bootloader trying to fix the xp on that system.

System wont boot, trying to repair via win 10 usb installer.

Downloaded the media creation tool to install windows 10 installer on usb stick. Not compatible with a host of usb sticks I have. Tried the usb sticks that others use, but I think they use rufus; as the media creation tool by win 10 does not detect the usb stick.

So quick question, the win10 machine i am trying to repair the bootloader is a win7 upgraded to win10.
If i were to use the usb win10 installer to "repair installation" does the version of the iso downloaded via the media creation tool matter?

There is three options:
Windows 10
Windows 10 Home
Windows 10 N

Also is there a step by step instead of using rufus as I want to try an alternative method of creating a usb win 10 installer. Preferably with more compatibility.

System is a asus sabertooth 990 (r2?) with AMD phenom X 6.

Also is there any other software I can load onto the usb that can repair the bootloader easily?
That would be the ideal alternative. Thanks

 

windows 10 slow boot

I was having a slow boot issue on my Windows 7 install a little while back. It would take about 30 - 40 extra seconds to boot up for whatever reason.

I would try following these steps, while this didn't solve my issue, it did increase Read/Write to where it should be.

http://www.disk-partition.com/kb/tips-ssd-optimization-windows7-1.html

Looks to be similar to this: https://www.back2gaming.com/focus-story/ssd-optimization-for-windows-10-windows-8-and-8-1/


In the end, I had to reinstall my Windows 7 entirely to fix the booting issue. It was taking around 35 seconds to boot, and after the fresh install it takes about 7 seconds to boot.