Windows 10: Windows 10 1809 update reverts quickly

I have a Dell XPS13 9360 laptop with 1803 on it. The 1809 update was not showing up when I checked for updates, so I downloaded the Update Assistant which was happy to start the upgrade. The system rebooted, I saw that the update was starting to install, and then about two minutes later it showed a message that it was reverting to the previous version (and did). No error message was ever displayed. Where can I find a log file that might have an explanation?


A possibly related thing is that this laptop uses Secure Boot and Bitlocker. I had found earlier that if I left Bitlocker (and Secure Boot) enabled, the 1809 update would render the system unbootable because the BIOS (UEFI) didn't see the boot disk. I had to disable these in order to get at least this far.

:)

 

Windows 8 failure configuring updates and reverting

I agree 8 is awful! It's not for me though... I replaced a broken screen in a Win 8 laptop that was given to me and I am going to give it for free to someone that can't afford one so they can do homework at home. Yes I took it from 8 to 8.1 back on 10/09/2014. This is what I posted there...

"Great post! I found a similar one. I would like to point out that you may want to edit your OP...

1. Step 1 should read to disable AUTOMATIC updates, not disable manual updates.

2. KB2871398 should really read KB2871389

I would like to say that KB2917499 may also be needed as it was in my case. I also had to run the Windows Update Troubleshooter after installing those 2 updates. After these steps I was able to begin my 8.1 download from the Microsoft store. I don't know if it made a difference or not, but I also went into the Bios and disabled "Secure Boot."

It was a helpful post. Thanks!

 

Windows 10 upgrade problem, no input accepted

I really hate having to come here and ask for help, but I really am stumped. It hurts my geek pride. I have a PC with fairly modern hardware in it. It has a p8p67 pro in it. I have tried upgrading windows 10 on it twice now. Both times I have had the same result.

After windows finishes upgrading it goes to the log in/set up screen. I can't do anything. No keyboard or mouse input is accepted.

I will list some, or hopefully all, of the troubleshooting steps I have tried:

• Move keyboard and mouse to different USB ports.
• Try different keyboard or mouse.
• Restart computer, repeatedly.
• Google for related issues.
• Update Bios, because why not.
• Create boot media and revert to windows 7.

The windows 10 system restore boot media works fine with keyboard and mouse. All USB ports work in windows 7. I don't know what is wrong. I suspect that windows 10 is lacking a driver of some sort, but since the computer accepts no input I have no way of checking for which driver let alone installing it.

Please help me figure this out. If I have to revert back to windows 7 again, I am not going to get it upgraded to windows 10. Thank you in advanced.

 

Windows 8 failure configuring updates and reverting

No, the license only applies to the Windows 8 OEM copy the original owner purchased with laptop, it doesn't magically transform into Windows 8.1 Retail one.

OK, so here's the commonly recommended steps that should help you with your problem.

Before you begin, I would recommend you to download both of these files and save them on your USB drive in order to use it later as the only source of third-party packages:

• http://ftp.hp.com/pub/softpaq/sp67001-67500/sp67259.exe
• Download nicht abgeschlossen | AMD

1. The first step would be to recover the original Windows installation using your hard drive partition (the thing that you've done before, I believe). Follow the steps described here (http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03544793#N258) and see if you missed anything. By the end of this operation, make so that your HP product is not connected to any sort of network.

2. Configure your HP device to boot in "clean" mode as described here (http://support.microsoft.com/kb/929135). Restart once.

3. Run the first file you've downloaded (http://ftp.hp.com/pub/softpaq/sp67001-67500/sp67259.exe) from your just-recovered Windows copy and follow the steps required.

4. Run the AMD package (http://www2.ati.com/drivers/amd-catalyst-14.4-64bit-win8.1-win8-win7-whql-aug.exe). Choose the "Advanced" installation option in order to be able to opt-out the "AMD/Raprt App" and "HydraVision" packages.

5. Establish an Internet connection. Run "Windows Store" tile from your Start screen, and select "Windows 8.1" package.

6. Once you're done with your migration from Windows 8 to Windows 8.1, you can install all the critical updates offered by Windows Update, which would be driver software, then Windows 8.1 Update package (KB2919442 > KB2919355 > KB2932046 > KB2959977 > KB2937592 > KB2938439 > KB2934018), "August" Update (KB2993651 > KB2975719 > KB2993100 > KB2979582 > KB2990532 > KB2995004) and .NET Framework 4.5.2 (http://www.microsoft.com/en-us/download/details.aspx?id=42642).