Windows 10: Windows 10 instal from usb

Hello there! I am asking this question because i had a recent issue with my laptop, and now my desktop does not have a working OS hard drive. I have the installation media tool and i have created a windows 10 usb. When i go into the BIOS and change the settings i need for the computer to boot from the installation media, i boot it up and it displays “dell optiplex 7010 hardware password jumper removed” and proceeds to a black screen showing “error; air temperature sensor not detected Front I/O cables disconnected Etc.” it then says click F1 to continue boot F2 to change setup option and F5 to perform hardware check

so i continue with F1 and start the installation process. The setup gets to the end were it says “finishing up, your pc will need to restart to finish” and it boots back up with the same messages, and loops back into the beggining of the setup. I tried to click “repair computer” in the bottom left corner of the startup menu and it did nothing to help. So my questions are...

1. How do i remove these messages as they are time consuming during boot

2. How do i get windows 10 to instal fresh without the boot loop

3. What are the BIOS settings i need to configure on the Dell Optiplex 7010 to do this


my pc is running

Optiplex 7010 motherboard

Radeon R7 260x graphics card

Intel I7 CPU the exact of it’s deatils are unknown

320 GB Seagate HDD

and

1.5 TB Seagate HDD

:)

 

Windows 10 USB boot

Hi there, am not a windows 10 expert. I have a pc in the bedroom on windows 10, I messed up the bootloader trying to fix the xp on that system.

System wont boot, trying to repair via win 10 usb installer.

Downloaded the media creation tool to install windows 10 installer on usb stick. Not compatible with a host of usb sticks I have. Tried the usb sticks that others use, but I think they use rufus; as the media creation tool by win 10 does not detect the usb stick.

So quick question, the win10 machine i am trying to repair the bootloader is a win7 upgraded to win10.
If i were to use the usb win10 installer to "repair installation" does the version of the iso downloaded via the media creation tool matter?

There is three options:
Windows 10
Windows 10 Home
Windows 10 N

Also is there a step by step instead of using rufus as I want to try an alternative method of creating a usb win 10 installer. Preferably with more compatibility.

System is a asus sabertooth 990 (r2?) with AMD phenom X 6.

Also is there any other software I can load onto the usb that can repair the bootloader easily?
That would be the ideal alternative. Thanks

 

Is it time for Windows 10 already?

Here's a good step by step guide on doing a fresh install.

How to clean install Windows 10 from a USB drive - Software - Feature - HEXUS.net

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk