Windows 10: Windows 10 Network Discovery keeps turning itself off - SOLVED

I have had this problem for about 2 weeks. My windows 10 Pro I use for a home server stopped sharing files.

When I checked Turn On Network Discovery setting in Change Advanced Sharing Settings it was off. I set it back to on rebooted and checked again and it was off again.


I spent hours looking for a solution which seemed to be to ensure the following services were started.


DNS Client

Function Discovery Resource Publication

SSDP Discovery

UPnP Device Host


All were running but DNS Client settings were greyed out in properties.

I could get the sharing to work for a while by restarting the other 3 services but a server reboot and the shares were gone again.


In the end I tried this and it has so far fixed the issue.


Use regedit to find

Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dnscache


Double click the Start value in the right hand window and change the value to 1.


This will change the startup type to System which seems to have fixed my issue.

Make sure you turn on Network Discovery in Change Advanced Sharing Settings.


Saw that a few people have had this issue so thought I'd post this.


My Windows 10 Pro has all updates as of 28/11/2018.

:)

 

Cannot keep Network Discovery Enabled.

Hi,

Thank you for the response.

I would suggest that you change the settings in the Firewall to allow Network discovery so that the Firewall stays On while allowing the Network discovery to be enabled.

Follow the steps.

a . Open Control panel.

b. Small icons from the drop down.

c. Click on Windows Firewall.

d. Click on Allow programs or feature through Firewall.

e. Scroll the list and check Network Discovery.

If you need additional assistance then let us know.

 

Turn on Network discovery keeps unticking itself

Trouble shooters says no issues found.

I believe it all comes back to the fact I can not turn on Network discovery.

 

Network Discovery Spotty

Hello,



For each of the machines experiencing this behavior, will you please perform the following:

• 
  Ensure Network Discovery is enabled.
  
  • 
    Control Panel\Network and Internet\Network and Sharing Center\Advanced sharing settings
    
    • 
      For each Network Category (Public, Private, Domain) you wish to have the feature enabled, click the arrow to the right of the category to expand it, and select “Turn on network discovery” & check “Turn on automatic setup of network
      connected devices”
      
• 
  Ensure that Network Discovery is allowed inbound in the Windows Firewall (in addition to any other firewall in use).
  
  • 
    [Windows Key + R] > Firewall.cpl
    
    • 
      Click “Allow an app or feature through Windows Firewall” in the left pane.
      
    • 
      In the Allowed apps and features scroll box, find “Network Discovery”.
      
    • 
      Make sure it is checked for all of the Network categories that you have enabled.
      
• 
  Ensure the necessary services are started.
  
  • 
    [Windows Key + R] > Services.msc
    
    • 
      Base Filtering Engine
      (BFE)
      
    • 
      Computer Browser
      (Browser)
      
    • 
      DHCP Client
      (DHCP)
      
    • 
      DNS Client
      (DNSCache)
      
    • 
      Network Connection
      (NetMan)
      
    • 
      Network Location Awareness (NLASvc)
      
    • 
      Remote Procedure Call (RPC) (RPCSS)
      
    • 
      Server
      (LANManServer)
      
    • 
      SSDP Discovery
      (SSDPSrv)
      
    • 
      TCP/IP NetBIOS Helper
      (LMHosts)
      
    • 
      Workstation
      (LANManWorkstation)
      
• 
  Ensure the network interface that is connected to the network you want devices discovered is in the appropriate network category.
  
  • 
    [Windows Key + R] > Cmd.exe
    
    • 
      Type “PowerShell.exe Get-NetConnectionProfile”
      

In this output you will find Network Category, which needs to correspond to the category enabled through the firewall, as well as when Network Discovery is turned on.

• • • • • 
          For machines with multiple interfaces, you will need to know the name of the interface which is connected to the network with the devices you wish to be discovered
          
• 
  Ensure your Network bindings are correct.
  
  • 
    [Windows + R] > NCPA.cpl
    
    • 
      Right click the interface and select Properties
      
    • 
      Ensure the bindings are bound
      
      • 
        Client for Microsoft Networks
        
      • 
        File and Printer Sharing for Microsoft Networks
        
      • 
        Link-Layer Topology Discovery Mapper I/O Driver
        
      • 
        Link-Layer Topology Discovery Responder
        
      • 
        Microsoft LLDP Protocol Driver
        
      • 
        Internet Protocol Version 4 (TCP/IPv4)
        
      • 
        Internet Protocol Version 6 (TCP/IPv6)
        
    • 
      If any of these are unbound, try rebinding, and if that still doesn’t work, from an elevated command prompt, run
      “NetCfg.exe –d”
      

Hope this helps